Alcohol burner with remote feeding

- 2:42 I made the threads in the aluminum tube just using a bolt. There's no need for a thread tap;

- I did not use substances to sealing or any type of glue. The parts are simply fitted firmly;

- Only the burner and part of feeding tube get warm. The reservoir remains cold all the time;

- Pre-heating is needed;

- The cotton wick limits the alcohol flow;

- All the parts are basically garbage - an empty deodorant spray, tubes of an old aluminum antenna, a cotton rag or wick and bolts.

Видео Alcohol burner with remote feeding канала foguista