Mounting hgr25 linear rails for my 6040 cnc router y axis
Hello I decided to push through and make the final upgrades for my cnc router. I would like to use it to machine a part for mounting a quick change tool post for my emcoturn and later a turret.
in this video I make a linear rail slide upgrade for my y axis. exchanging the old supported rods against hgr25 rail and hgh25 rail blocks.
First try to square two long aluminium pieces to which I mount the rails. It was alot of job since the aluminium were 700 mm and I Only got ~200mm of travel on my minimill.
I then drilled and tapped mounted and aligned the rails.
Hopefully I can have booth the router and lathe running next week.
Видео Mounting hgr25 linear rails for my 6040 cnc router y axis канала TheChipWelder
in this video I make a linear rail slide upgrade for my y axis. exchanging the old supported rods against hgr25 rail and hgh25 rail blocks.
First try to square two long aluminium pieces to which I mount the rails. It was alot of job since the aluminium were 700 mm and I Only got ~200mm of travel on my minimill.
I then drilled and tapped mounted and aligned the rails.
Hopefully I can have booth the router and lathe running next week.
Видео Mounting hgr25 linear rails for my 6040 cnc router y axis канала TheChipWelder
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to install Linear Guides - NSK Installation TutorialMachining New gauntry base plate for my 6040 cnc router hgr25 linear rail upgradeMaking of 210x310cm (6,8x10,1ft) CNC RouterTuning Up Cheap Chinese Linear BearingMiHow2 - NSK - How To Properly Install An NSK Linear GuideI got a HUGE new CNC Router! (AVID CNC 4x8 PRO 4896) // WoodworkingHow to install NSK Linear products - 2. Ball ScrewDIY CNC Plasma Table - Part 2 Linear Rails#29 Linear Sliding Rail Guide #29 / MGN12 / Dial Gauge Jig / Improving Movement / Butting RailsBuilding a Benchtop CNC -Part 1 - Y-AxisChinese Linear Slide Bearings - Something to watch for.I Used Linear Rails To Make A DIY Router Flattening Jig, And It's Awesome!6040 CNC Router - Rebuilding z axis New, 2.2kw er20 spindle (Linear rail upgrade part 1)Building the Avid CNC PRO 4848 4' x 4' CNC Router Kit6040 CNC ROUTER - Mount new z and x Axis to the gantry @6:00 (Linear rail upgrade part 7)Tabletop Extrusion CNC Router Build - Part 2Chasing Micrometres with the best Ball ScrewsATC Spindle and Pneumatic Tool Rack Upgrade For X6 6040 UCCNC Router Now Operational - Part 3Upgrading the Z-Axis Linear rails on my Homemade CNC RouterA VERY SIMPLE ROUTER SLED