How to install Linear Guides - NSK Installation Tutorial
How to install NSK Linear products - Tutorial - 1. How to install NSK Linear Guides.
Correct installation of NSK Linear Guides is important for long life, low friction, and high accuracy. In this video you will learn the proper procedure to install NSK Linear Guides, a product essential for linear motion applications. Learn more about NSK Linear Products: https://www.nskeurope.com/en/products/linear-components.html
Content:
0:15 Remove burrs and particles from base mounting surface using oil stone and rag
0:33 Place the straight edge in the middle of base
0:44 Confirm the straightness of rail mounting shoulder (Repeat for the other side)
0:58 Confirm the straightness of rail mounting surface (Repeat for the other side)
1:14 Clean linear guide rail mounting surface
1:45 Mount the linear guide rail
2:15 Install rail mounting bolts loosely
2:45 Install the shoulder plates loosely, then tighten with specified torque
3:02 Torque down rail mounting bolts. Follow the correct tightening sequence.
3:23 Confirm the straightness (lateral) of master rail.
3:37 Confirm the 2nd rail straightness (lateral) an parallelism (lateral) against master rail.
3:53 Confirm the height error between msater rail and 2nd rail.
4:49 If you don´t have straight edge, check parallelism of master and 2nd rail using the following method.
5:25 Attach moving table. Check that the table moves smoothly.
6:27 Confirm the straightness (vertical) at table center, make sure it is within your requirements.
6:44 Confirm the straightness (lateral) at table center
! Please note: For high accuracy installation, please follow our catalogue instructions or contact us on www.nskeurope.com !
About NSK Europe:
NSK products and solutions are everywhere where something is moving – even deployed under the hardest of conditions. Our high precision roller bearings and ball bearings are spinning away in wind turbines and machine tools, our linear systems are hard at work in production lines. As a worldwide strategic partner to the top automobile manufacturers and suppliers, NSK provides solutions that offer more performance while taking up less space. Intelligent steering systems, engine, wheel hub and transmission bearings – our OE car parts not only ensure more efficient use of fuel, but also increased safety for automobiles.
Connect with NSK Europe:
Website: https://www.nskeurope.com/
LinkedIn: https://www.linkedin.com/company/nsk-europe/
Видео How to install Linear Guides - NSK Installation Tutorial канала NSK Europe
Correct installation of NSK Linear Guides is important for long life, low friction, and high accuracy. In this video you will learn the proper procedure to install NSK Linear Guides, a product essential for linear motion applications. Learn more about NSK Linear Products: https://www.nskeurope.com/en/products/linear-components.html
Content:
0:15 Remove burrs and particles from base mounting surface using oil stone and rag
0:33 Place the straight edge in the middle of base
0:44 Confirm the straightness of rail mounting shoulder (Repeat for the other side)
0:58 Confirm the straightness of rail mounting surface (Repeat for the other side)
1:14 Clean linear guide rail mounting surface
1:45 Mount the linear guide rail
2:15 Install rail mounting bolts loosely
2:45 Install the shoulder plates loosely, then tighten with specified torque
3:02 Torque down rail mounting bolts. Follow the correct tightening sequence.
3:23 Confirm the straightness (lateral) of master rail.
3:37 Confirm the 2nd rail straightness (lateral) an parallelism (lateral) against master rail.
3:53 Confirm the height error between msater rail and 2nd rail.
4:49 If you don´t have straight edge, check parallelism of master and 2nd rail using the following method.
5:25 Attach moving table. Check that the table moves smoothly.
6:27 Confirm the straightness (vertical) at table center, make sure it is within your requirements.
6:44 Confirm the straightness (lateral) at table center
! Please note: For high accuracy installation, please follow our catalogue instructions or contact us on www.nskeurope.com !
About NSK Europe:
NSK products and solutions are everywhere where something is moving – even deployed under the hardest of conditions. Our high precision roller bearings and ball bearings are spinning away in wind turbines and machine tools, our linear systems are hard at work in production lines. As a worldwide strategic partner to the top automobile manufacturers and suppliers, NSK provides solutions that offer more performance while taking up less space. Intelligent steering systems, engine, wheel hub and transmission bearings – our OE car parts not only ensure more efficient use of fuel, but also increased safety for automobiles.
Connect with NSK Europe:
Website: https://www.nskeurope.com/
LinkedIn: https://www.linkedin.com/company/nsk-europe/
Видео How to install Linear Guides - NSK Installation Tutorial канала NSK Europe
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Belt Tensioner - Food & Beverage - NSK - AIP - Success StoryAir Recirculation FanNSK Stores SurveyConcrete Pipe CuttingNSK Linear Motion Control - Precisely ForwardDough Prove – Food and Beverage - NSK – AIP – Success StoryWind Turbines and NSKNSK Process MappingNSK Cylindrical Roller BearingsNSK Bearings for the Steel IndustryBearings for Steel & Non-Ferrous Industries - Steel and NSKNSK at EMO Hannover 2017NSK RHP Self-Lube Bearing UnitsNSK - Connecting with Motion & ControlNSK Solutions - MiningGuidages linéaires NSK – séries NH/NSSlurry Pump - Cement - NSK - AIP - Success StoryGuide Lineari Serie NH/NS di NSKBearing Doctor App - Remote diagnostic for NSK customersNSK Virtual SellingSpherical Roller Bearings - Long-life Vibrating Screen