Assembling and priming the fuel system on our John Deere 2010 tractor

This turned out to be easier than I was anticipating. After mounting the fuel tank I assembled the settling bowl and fuel lines, then opened the valves up. I cracked to injector lines before turning the engine over several time to bleed air from the system.
We then hooked up a strap and pull cranked it with the truck. I put the transmission in a high gear and once rolling let the clutch out. It only took a few hundred feet for it to start right up. This is the easiest way to start a tractor that has ran out of fuel.
Thank you so much for watching! Please don’t forget to subscribe to our channel, and click thr bell icon so you can be notified when we share new videos. Its free and only takes a moment. We share a wide variety of videos ranging from family adventures to farming and homesteading.

Follow us on Facebook: https://m.facebook.com/profile.php?id=103779337978251&ref=content_filter

Follow us on Instagram: @southcountrylife

Видео Assembling and priming the fuel system on our John Deere 2010 tractor канала Maynard Family Homestead