Part 1: Drill Press (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.)
This is the first in the series showing how I build CLOCKstep out of Hammond 1590Q Enclosure. These methods can be used as a short tutorial if you are making your own DIY guitar pedal builds in a single or small batch. The focus is on a professional and consistent result using manual equipment.
Chapters:
0:00 Intro
1:11 Template
1:30 Center Punch
2:32 Jig Setup
3:25 Pilot Hole
4:32 Uni-Bit Hole
6:48 Countersink
8:18 Next Steps
Check out Reverb or the CLOCKstep website for more information on what the pedal I'm building does:
https://reverb.grsm.io/clockstep
https://jmkmusicpedals.com/products/clockstep
Видео Part 1: Drill Press (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.) канала JMK Music
Chapters:
0:00 Intro
1:11 Template
1:30 Center Punch
2:32 Jig Setup
3:25 Pilot Hole
4:32 Uni-Bit Hole
6:48 Countersink
8:18 Next Steps
Check out Reverb or the CLOCKstep website for more information on what the pedal I'm building does:
https://reverb.grsm.io/clockstep
https://jmkmusicpedals.com/products/clockstep
Видео Part 1: Drill Press (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.) канала JMK Music
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
CLOCKstep:MULTI - Latency Compensation (featuring Ableton Live and Sample Accurate Clock)CNC Router Cutting ABS Plastic EnclosureMIDI Clock Doesn't Work (and a Guide to What You Can Do About It)CLOCKstep:MULTI - Sync Ableton Live using CV Clock In (Max for Live)CLOCKstep:MULTI - Tape Sync (Striping an Analog Track with Clock Data)CLOCKstep:MULTI - Synchronize (MIDI Clock, CV Trigger Sync, DAW Sync, Sample Accurate Clock)CLOCKstep:MULTI - Transport ModesCLOCKstep:MULTI - Tempo Control FeatureCLOCKstep:MULTI - Metronome Click Audio FeatureCLOCKstep:MULTI - Synchronization Hub & Audio MetronomeChange a Free Form Guitar Loop into Quantize Loop. Sync it to MIDI Clock and to another Sequencer.11) Keyboard Mode & Dynamic Bar Looping (MIDI Sequencer Development)11) DAW Sync to Sequenced Drums (MIDI Sequencer Development)CLOCKstep Firmware 1.1.36 (MIDI Master Clock and Metronome)HX Stomp and Timeline Synced Looping and Quantize (with CLOCKstep firmware 1.1.36)10) All Features So Far and UI Overview (MIDI Sequencer Development)9) First Enclosure Prototype & Live Control Change Recording (MIDI Sequencer Development)Part 5: Assembly. (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.)Part 4: Silkscreening. (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.)Part 3: Powder Coat. (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.)Part 2: Vertical Mill. (How To Build a Stomp Box using a Hammond Enclosure. A Short Tutorial.)