Turning On The Heat For 2022
Originally recorded November 8, 2022.
Well, it got frozendy inside the house for a few days. But then the weather warmed up again. However, it was going to get really cold by the weekend, so I figured I'd better be proactive and get this up and running. I dread doing this because the system is old.
What I have here is a gas-fired hydronic boiler, made by HydroTherm, from 1974. There are no computers, the only "safety" is the thermocouple. I leave the pilot light lit year round.
First step is cleaning. I get out my trusty IBM service vacuum and vacuum up what I can.
https://youtu.be/ho6U7buof-0
Next comes compressed air. I fire up my trusty old Coleman 6-gallon air compressor and let it charge up.
https://youtu.be/dv5XnF_SgXc
https://youtu.be/Hq5wuNVUnUM
https://youtu.be/XsMub4SM8kY
I used my Harbor Freight remnant hose to extend the air line down to the boiler, and then my Harbor Freight long blow gun to blow out all the dust, cobwebs, and other schmutz from around the boiler, as well as the inside. Inside, when I blow air, it can and does cause the pilot light to go out, so I relight it immediately when it goes out.
https://youtu.be/4_y4jftoVao
https://youtu.be/eQLuRGsdEuU
Once that's all done, it's time to turn on the pumps. I did so, and they both fired up, as both thermostats were, of course, calling for heat. The indicator lights I had added let me know which pumps (both, obviously) were getting power.
https://youtu.be/mavirQzQkpI
I then felt all of the pipes. I felt them get warm, then ice cold, which is a good thing. The warmth was from the pilot light, and the cold was the rest of the water in the system, so I knew that everything was circulating.
Then, just turn on the gas valve, the burner ignites, and let it cook up. Takes a good 10 minutes or so for it to heat all of the water to about 190°, which is continuously being circulated. I could tell, without even having to move, that the pipes were getting hot from the gauges I put on them.
https://youtu.be/abKzinFl06k
I tested the air to make sure the flue was exhausting out of the house using my Aiment Air Quality Monitor.
https://youtu.be/BQYyLND8rWc
All of the pipes got hot, all of the radiators got hot, we have heat! Should be good to go!
Видео Turning On The Heat For 2022 канала jaykay18
Well, it got frozendy inside the house for a few days. But then the weather warmed up again. However, it was going to get really cold by the weekend, so I figured I'd better be proactive and get this up and running. I dread doing this because the system is old.
What I have here is a gas-fired hydronic boiler, made by HydroTherm, from 1974. There are no computers, the only "safety" is the thermocouple. I leave the pilot light lit year round.
First step is cleaning. I get out my trusty IBM service vacuum and vacuum up what I can.
https://youtu.be/ho6U7buof-0
Next comes compressed air. I fire up my trusty old Coleman 6-gallon air compressor and let it charge up.
https://youtu.be/dv5XnF_SgXc
https://youtu.be/Hq5wuNVUnUM
https://youtu.be/XsMub4SM8kY
I used my Harbor Freight remnant hose to extend the air line down to the boiler, and then my Harbor Freight long blow gun to blow out all the dust, cobwebs, and other schmutz from around the boiler, as well as the inside. Inside, when I blow air, it can and does cause the pilot light to go out, so I relight it immediately when it goes out.
https://youtu.be/4_y4jftoVao
https://youtu.be/eQLuRGsdEuU
Once that's all done, it's time to turn on the pumps. I did so, and they both fired up, as both thermostats were, of course, calling for heat. The indicator lights I had added let me know which pumps (both, obviously) were getting power.
https://youtu.be/mavirQzQkpI
I then felt all of the pipes. I felt them get warm, then ice cold, which is a good thing. The warmth was from the pilot light, and the cold was the rest of the water in the system, so I knew that everything was circulating.
Then, just turn on the gas valve, the burner ignites, and let it cook up. Takes a good 10 minutes or so for it to heat all of the water to about 190°, which is continuously being circulated. I could tell, without even having to move, that the pipes were getting hot from the gauges I put on them.
https://youtu.be/abKzinFl06k
I tested the air to make sure the flue was exhausting out of the house using my Aiment Air Quality Monitor.
https://youtu.be/BQYyLND8rWc
All of the pipes got hot, all of the radiators got hot, we have heat! Should be good to go!
Видео Turning On The Heat For 2022 канала jaykay18
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
4th Of Ju-Slime 2020, Part 1 - Making Slime!Yostyle Alarm Clock Charging Station ReviewGreen Expert 1/3 HP Submersible Sump Pump ReviewHailicare Heated Vibration Knee Massager ReviewOld War Stories With Uncle Jay - "Oceanography Report Fiasco"DIY--Blow Out Your Inground Sprinklers--A METHODICAL APPROACH (2017)Old War Stories With Uncle Jay - "Long Beach"Mazda Blower Motor Run-UpRepairing The Check Valve On The Silent Air Compressor!Harbor Freight - Pittsburgh Automotive Pneumatic Roller Seat ReviewHow To Open Inground Sprinklers (2017)Elecstars RGB Touch Lamp With Bluetooth Speaker ReviewRedoing The Connections On The Pool's Polaris Booster PumpEONLION Siphon Pump ReviewOld War Stories With Uncle Jay - "Utterly Useless"NEXPEAK Automatic Car Battery Trickle Charger And Maintainer ReviewMy Newer Whirlpool Washer Isn't Working Properly, Can I Fix It?HadinEEon Electric Milk Frother ReviewWashDay Wash-In 2.0 With tallboyyyy!!!How To Winterize (Blow Out) Inground Sprinklers (2015)GearLight S100 2-Pack UV LED Flashlight Review