How to tune your slicer settings featuring Ender 3

I get frequent requests for slicing profiles, so I’d thought it might be worth a video showing ways you can take a profile and tweak it for better results.

This video covers extruder calibration, flow rate/extrusion multiplier calibration, temperature, speed and retraction calibration. If you have an Ender 3 you can download and run the g-code from the link below. Most others printers can do the same, assuming they don’t have a really small bed.

Edit: As several have pointed out, my speed conversion was wrong. The speed test goes from 3000 to 6000 mm / min, which is 50 mm/sec to 100 mm/sec every 5 mm. The outline is slowed by 50%, hence the need to slice it hollow so you can see the full speed on the inside walls.

Edit2: Clever people have pointed out that a minimum layer time setting was preventing the speed test gcode from running properly. The gcode has now been updated in the Thingiverse link.

I've also added my FFF file for Simplify3D.

Purchase the Ender 3 from these links:
Ender 3 Pro Banggood ($30 off with coupon 1d1c08): http://bit.ly/2OUcEyS
Ender 3 Banggood (US warehouse, Coupon: f2bf59): http://bit.ly/2Efoi6B
Ender 3 Pro Amazon: https://amzn.to/2DpkbEs
Ender 3 Amazon: https://amzn.to/2xyJ23s
Ender 3X (glass bed version): https://amzn.to/2I7dG85

Teaching Tech Speed test, my Ender 3 Simplify3D profile and all my gcode from this video: https://www.thingiverse.com/thing:3071464
Micro all in one 3D print test: https://www.thingiverse.com/thing:2975429/
Heat tower: https://www.thingiverse.com/thing:2223651/
Basic retraction test: https://www.thingiverse.com/thing:2563909/
Simplify3d print troubleshooting guide: https://www.simplify3d.com/support/print-quality-troubleshooting/

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Gearbest affiliate link (help support the channel): https://www.gearbest.com/?lkid=13807527

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

#3Dprinting #ender3 #calibration

Видео How to tune your slicer settings featuring Ender 3 канала Teaching Tech