Pipe Sizing, Pressure Drop Calculation, Use of Adjust Function in HYSYS

Pipeline sizing and hydraulic study are very important for an economical plant design.
In this video, you will learn how to calculate the pressure drop inside the pipe and use of adjust function. You will see how the adjust function provides help to determine the feed flowrate for having the limiting velocity in the pipeline. In the end, you will see the plots (pressure drop vs pipe length and many others).

📢 If you find my content helpful, please don't forget to subscribe to my channel 🔔. If you want ❤️ to learn Aspen HYSYS from very basic, then check the following links:

Tutorial # 1

Getting started with Aspen HYSYS
https://www.youtube.com/watch?v=PIlFfN04d5c&t=3s

Tutorial # 2

Bubble point, Dew point and Phase diagram calculations
https://www.youtube.com/watch?v=51xsH4Ejpd8&t=39s

Tutorial # 3

Flash calculations in HYSYS
https://www.youtube.com/watch?v=XfOVKGr0fp0&t=24s

Tutorial # 4

Sensible and latent heat and generation of saturated steam table in Aspen HYSYS
https://www.youtube.com/watch?v=d156FmGmUZk&t=63s

Tutorial # 5

Centrifugal pump sizing and selection in six easy steps
https://youtu.be/fL1M77QVPHE

Tutorial # 6

Pump power and efficiency calculations in HYSYS
https://youtu.be/ppj-xhOdiCQ

Tutorial # 7

Pump performance curves generation and rating in HYSYS
https://www.youtube.com/watch?v=6H3gVMHPnM0&t=208s

Tutorial # 8

Simulation of Compressor and Turbine in Aspen HYSYS
https://youtu.be/7F8l48W__mI

Tutorial # 9

Compressor Surge Analysis in Aspen HYSYS
https://www.youtube.com/watch?v=ssB3qbXdHhY&t=144s

#Pipe pressure drop #Adjust function #Pipe sizing #Pressure drop profiles

Видео Pipe Sizing, Pressure Drop Calculation, Use of Adjust Function in HYSYS канала Engineering.X