Building a Toyota "narrow e-series" to improve Evey's drag racing setup.
Building a Toyota "narrow e-series" to improve Evey's drag racing setup.
Toyota's Tech Info site. This does require a $25 payment for 2 days worth of access but it gives you access to every document from Toyota and you can just save them as PDFs for the future.
https://techinfo.toyota.com
You can buy the reproduction forward shift shaft from Alex here: https://wilhelmraceworks.com/shop/E-Series-Shift-Shaft-p572338557
I did use a few special tools during the assembly of this. Here are links if anyone wants to know. Note that some of these are affiliate links and i will get a bit if you buy through them.
Impact screwdriver, note the one i use isn't easily available but this one has a rubber handle which should make it a lot nicer to use: https://amzn.to/3TVLcVs
Stone: https://www.amazon.com/gp/product/B01BH7F1EE This is the exact one i use but there are cheaper ones available now. You don't need something nice for the kind of abuse this kind of usage does to it.
pitman puller https://amzn.to/3xhKxEO
Slide hammer https://amzn.to/3TWtEsd (note there are tons of choices here and most will work just fine)
Chapters:
0:00 Intro
0:25 What & Why
2:33 Disasembly, Inspecting and remixing
3:24 Exploded view, discussing which parts to use.
6:20 Narrow E series Strength discussion
8:45 Shift quality
11:05 Reassembly
12:50 Machining the case for a forward shift
14:45 Setting Output Shaft preload
16:30 Setting Differential preload
22:00 final assembly
25:50 5th gear assembly
28:30 Outro
Видео Building a Toyota "narrow e-series" to improve Evey's drag racing setup. канала Frankenstein Motorworks
Toyota's Tech Info site. This does require a $25 payment for 2 days worth of access but it gives you access to every document from Toyota and you can just save them as PDFs for the future.
https://techinfo.toyota.com
You can buy the reproduction forward shift shaft from Alex here: https://wilhelmraceworks.com/shop/E-Series-Shift-Shaft-p572338557
I did use a few special tools during the assembly of this. Here are links if anyone wants to know. Note that some of these are affiliate links and i will get a bit if you buy through them.
Impact screwdriver, note the one i use isn't easily available but this one has a rubber handle which should make it a lot nicer to use: https://amzn.to/3TVLcVs
Stone: https://www.amazon.com/gp/product/B01BH7F1EE This is the exact one i use but there are cheaper ones available now. You don't need something nice for the kind of abuse this kind of usage does to it.
pitman puller https://amzn.to/3xhKxEO
Slide hammer https://amzn.to/3TWtEsd (note there are tons of choices here and most will work just fine)
Chapters:
0:00 Intro
0:25 What & Why
2:33 Disasembly, Inspecting and remixing
3:24 Exploded view, discussing which parts to use.
6:20 Narrow E series Strength discussion
8:45 Shift quality
11:05 Reassembly
12:50 Machining the case for a forward shift
14:45 Setting Output Shaft preload
16:30 Setting Differential preload
22:00 final assembly
25:50 5th gear assembly
28:30 Outro
Видео Building a Toyota "narrow e-series" to improve Evey's drag racing setup. канала Frankenstein Motorworks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
2GR-FE MKII MR2 FlyByUpgrading the axles on the 2AR powered MR2 SpyderIntroducing Evey!Examining upgraded axles for MR2 SpyderLaps at IMS in the MR2 Spyder w/2AR-FEProject Widowmaker Part 4 - 2GR-FE powered MR2 SpyderRunning the 2.7L 1AR-FE MR2 on the Elite 1500 ECU(Part 1)kinner powered MR2 throttle linkage.MR2 Spyder BEAN body controller working & notes on California legal version of the swapMR2 Spyder BEAN body controller circuit board assembly & 2AR-FE build ramblings.MR2 Spyder body controller software demoInstalling a ChillOut shirt cooler in an MR2 SpyderAirplane MR2 transfer case2GR-FE Engine swap harness made easier for all generations of Toyota MR2s (SW20, AW11 and ZZW30)2AR-FE Camshafts are here! (Evey #5)Dyno and race day clips of 2GR-FE powered MR2 using infinity ECU.Getting even more power from the 2GR-FE 3.5L V62.5L 2AR-FE install into MR2 spyder, 205rwhp Part 5Kinner R55 Radial Airplane Powered MR2 update (the new drive train is somewhat finished)New MR2 parts for engine and transmission swapsRunning the 2.7L 1AR-FE MR2 on the Elite 1500 ECU(Part 2)