2GR-FE Engine swap harness made easier for all generations of Toyota MR2s (SW20, AW11 and ZZW30)

This video goes over step by step to convert a 3rd generation Toyota Sienna harness to prepare it for use in a 2GR-FE swap for any manual transmission vehicle.

Note that this harness will still need a small adapter harness to adapt it into the desired car, this just simplifies the Sienna harness for this use. Instructions for adapter harnesses are to follow.

Wiring instructions: https://FrankensteinMotorworks.com/2GRFE/diagrams/FM1%20connector%20wiring.pdf
Parts, including shirts and merchandise available here: https://frankensteinmotorworks.com

Note, while not mentioned in the video depending on your ECU location you may need to extend the MAF sensor wire also. You can avoid extending that wire by just buying a MAF sensor extension, they are available and match the 2015 Subaru WRX.

Discord Channel invite: https://discord.gg/jSzmVfv

Here are links to the tools and parts mentioned in the video, these are affiliate links and i do get a small percentage if you buy through these links:
Terminal Extraction tools: https://amzn.to/2Uholo4
Fluke Voltmeter: https://amzn.to/2XCmxYS
Fine Point Probes for Voltmeter: https://amzn.to/2MAS86T
Flush Cut Pliers: https://amzn.to/2zfuqtW
Heat gun: https://amzn.to/2PRBJgc (note the one i use is not available anymore, just get a 1000W or higher one otherwise you’ll be waiting forever. The 300W units are just too weak)
Ratcheting crimpers: https://amzn.to/2vNf0Lv

3-pin coolant sensor: https://amzn.to/2TMBEvo
3-pin pigtail: https://amzn.to/337Xv57
Dual wall heatshrink: https://amzn.to/2wx5lZM
Uninsulated butt crimp terminal 22-18ga: https://amzn.to/2Tuq5dx or cheaper on Waytek if you order multiple things and can spread the shipping: https://www.waytekwire.com/item/30270/Molex-19207-0001-Parallel-Splice-Connector-/
Uninsulated butt crimp terminal 16-14ga: https://www.waytekwire.com/item/31070/Molex-19208-0001-Parallel-Splice-Connector-/
Tesa Fabric wire harness tape: https://amzn.to/37iSBEt

Видео 2GR-FE Engine swap harness made easier for all generations of Toyota MR2s (SW20, AW11 and ZZW30) канала Frankenstein Motorworks