DIY Track Changing For Your Excavator - NO Hydraulic Pin Press NEEDED!

0:00 INTRO
0:31 TOOLS WE'LL NEED
3:15 INITIAL STEPS
3:30 LOCATE MASTER PIN
3:45 REMOVE SNAP RING
4:09 RELEASE TRACK TENSION
6:26 REMOVE MASTER PIN
8:11 REMOVE WASHERS
8:21 REMOVE OLD TRACKS
8:39 POSITION NEW TRACKS
10:17 POSITIONING MACHINE FOR INSTALL
10:54 HOOKING UP THE CHAIN
12:40 POSITIONING THE NEW TRACKS
13:05 POSITIONING UPPER AND LOWER LINKS
13:50 RE-INSTALL WASHERS
14:30 RE-INSTALL MASTER PIN
15:43 RE-INSTALL SNAP RING
16:00 ADJUST TRACK TENSION
16:27 TEKAMO TIP
17:04 ADJUST TRACK TENSION
17:56 RUNNING THE MACHINE
18:09 RE-ADJUST TRACK TENSION

Tool List
- Track pin driver
- 20lbs Sledgehammer
- Chains
- Pry bar
- Punch
- Snap ring pliers
- 1/2 inch drive ratchet with deep 24mm socket
- Grease gun
- Block of wood
- Grease

BE SURE TO SUBSCRIBE TO OUR CHANNEL!
Check out more of our amazing machine maintenance tutorials with Keith:
https://www.youtube.com/tekamohd

OPERATIONAL SAFETY:
Always ensure you are wearing the proper personal protective equipment suited for your procedure such as steel toe boots, safety glasses, hard hats, gloves, overalls and any other equipment suited for your task at hand.

---------------------------------------------------

CHECK OUT OUR PARTNER SITES!

** DRIP MARKETING ** This awesome video was proudly produced by them! https://www.dripmarketing.co/

** FORTISHD **
Affordable tracks, tires, & parts shipped to your door.
https://www.fortisHD.com/

** RENT1 **
Heavy equipment rentals for fast and easy work on any construction job. Residential or commercial, professional or homeowner, they've got earth-moving machine rentals for you!
CANADA: https://www.rent1.ca/
USA: https://www.rent1usa.com/

** SMARTCAST EQUIPMENT **
Purchase used heavy equipment for an amazing price (ask about their Rent-to-Own programs!)
https://www.smartcastequipment.com/
---------------------------------------------------

DISCLAIMER:

Any information on heavy equipment operation available at this channel is intended for general guidance only and must never be considered a substitute for the advice provided by a qualified heavy equipment instructor. Any reliance you place on such information is strictly at your own risk. If you intend to operate heavy equipment, always ensure you meet the legal permitting requirements based on your geographic location.

Although TekamoHD takes all reasonable care to ensure that the contents of the YouTube Channel are accurate and up-to-date, all information contained on it is provided ‘as is’. TekamoHD makes no warranties or representations of any kind concerning the accuracy or suitability of the information contained on this channel. To the extent permitted by mandatory law, TekamoHD shall not be liable for any direct, incidental, consequential, indirect, or punitive damages arising out of access to or use of any content available on this channel, regardless of the accuracy or completeness of any such content.

TekamoHD disclaims any control over, relationship with, or endorsement of views expressed by other YouTube users. All user comments are from members of the public and do not necessarily reflect the views of TekamoHD. TekamoHD may at any time and at its sole discretion change or replace the information available on this channel.

Видео DIY Track Changing For Your Excavator - NO Hydraulic Pin Press NEEDED! канала Tekamo HD