Camper Van Remodel pt. 2 - Framing

Click here: http://harrys.com/rainfall to get your Starter Set from Harry’s for just
$3!
LED Balloon Worklight: https://amzn.to/2Qjpw4Y

Now that harvest is wrapping up on the farm, I'm finally getting back to the camper van remod project. I took a couple more steps backwards first, tearing out the walls and floor. With the van essentially gutted now, I replace the flooring with 3/4" plywood by using the old flooring as a template. Then I get started on framing the walls by building a simple box around the wheel well and water heater. Next I start cutting ribs that match the curve of the van and try to place them on the edge of a vent or door that has screws around the perimeter of it, to help fasten the wood to the van. I used general construction adhesive wherever the wood is pressed up against the metal side of the van, and wood glue for the wood joints. It feels good to be making forward progress on this project!

Видео Camper Van Remodel pt. 2 - Framing канала Rainfall Projects