Camper Van Remodel pt. 5 - CNC'ing the Ceiling, and Lights, Flooring, A/C

The first 1000 people to use this link will get a free trial of Skillshare Premium Membership: https://skl.sh/rainfallprojects11201

I decided to use my CNC routing table to cut out the ceiling panels for camper van. I knew this would take longer to set up, but thought the quality of cuts and edges could possibly be a lot better, if I could get all my measurements right. I used a 90 degree v bit to cut groove lines into the plywood, making it look like wall paneling. I got some help from Kelly to put an artistic design into one of the pieces. I very happy and surprised that all the pieces fit first time! Once they were all installed and the seams caulked, I gave them a coat of paint. Then I could install the small LED puck lights, which were going to be great for working in the van. With the ceiling done, I moved onto installing the laminate flooring. I decided to cover the entire floor, and not just between the cabinets. Lastly, I set the new AC unit on top the van and start wiring it.

Видео Camper Van Remodel pt. 5 - CNC'ing the Ceiling, and Lights, Flooring, A/C канала Rainfall Projects