Micro Bird of Time build Part 1
This is part 1 of a two part video where I assemble the J & H Aerospace 48" (1200mm) Micro Bird of Time. Details of where to purchase this model below. If you have any questions then please leave a comment below.
https://jhaerospace.com/product/micro-bot/
Видео Micro Bird of Time build Part 1 канала A470 RC Soaring
https://jhaerospace.com/product/micro-bot/
Видео Micro Bird of Time build Part 1 канала A470 RC Soaring
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Micro Bird of time build Part 2 & the BIG decision
J&H Aerospace Mini Bird of Time (see description!)
The art of hotwire
Bird of Time - Ooops!
8 Steps to Carve a Perfect Balsa Propeller | Start to Finish
Bird of Time Scratch Build
V2 Pug
Great Planes Bird of Time EP Sailplane ARF - Model Aviation magazine
100" Messerschmitt Bf 109 Slope Glider
Micro Bird of Time | trimming & maiden flight - Part 1
MinimumRC ASG 32 Glider 560mm Wingspan Foam RC Airplane KIT Build
How to setup Adjustable Thrust & One-Way Drive for Rubber Powered Models
Introduction to Peewee 30 - eyedropper tanks and Cox glow engines!
EP5: Finally, its time to start gluing stuff together, Giant Scale RC Airplane Scratch Build
Micro Bird of Time build - Part 2.1 update
RC Slope Soaring
Eta, giant scale (1:2) RC glider, wingspan 15,45m, 2018
Building of the modified Leprechaun Glider
Mini Bird of Time. Built from a J&H Aerospace balsa kit.
Sunbird Electric Glider Laser Cut Balsa Kit 1500mm