Flying IFR in X-Plane using Pilot2ATC Part 2

Title: Flying IFR in X-Plane using Pilot2ATC
Description:
This is Part 2 of a five-part series describing a typical IFR flight consisting of
a SID and a RNAV approach. Pilot2ATC is used in all ATC communication and is
emphasized throughout.

Flying IFR in X-Plane using Pilot2ATC
Part 1 - Introduction https://youtu.be/vCyt_bhI9hc

Part 2 - Engine Start to Taxi [THIS VIDEO]
Part 3 - Takeoff to Approach https://youtu.be/iWGrpj2SdkU
Part 4 - Approach https://youtu.be/3k3YATAGKzY
Part 5 - Landing to Parking https://youtu.be/7nbXdGRrqs4

Table Of Contents - Part 2
On the ramp at departure airport 00:10
Starting World Traffic 3 00:27
Airplane Weight and Balance 01:07
Setting weather and time 01:28
Preflight Checklist 02:04
Starting Engine Checklist 03:54
Setting up the flight plan 06:47
Syncing P2A runways with X-Plane 06:50
Setting the parking spot at the departure 07:20
Entering the flight plan into P2A 07:35
Validating and filing the flight plan 09:35
Copying the flight plan clearance 09:47
CRAFT 10:08
Ground Control taxi clearance 12:15
The taxi 14:20
Transferring the FP from P2A to the X530 16:28
Copying the FP from the X530 to the X430 17:15
Approaching the hold short for takeoff 18:48

Equipment and Software Used:
* Trim Pots used in my CH Pro Throttle
www.mouser.com
PN 248-9-10-503
* X-Plane 11.41
www.x-plane.com
* Pilot2ATC
pilot2atc.com
* X-ATC-Chatter
www.stickandrudderstudios.com/x-atc-chatter-overview
* XChecklist
forums.x-plane.org/index.php?/files/file/20785-xchecklist-linwinmac3264
* X-Camera
www.stickandrudderstudios.com/x-camera
* TrackIR 5
www.naturalpoint.com/trackir
* Propwash Simulation COM/NAV panels
https://www.propwashsim.com
* CH Products controllers
www.chproducts.com

Видео Flying IFR in X-Plane using Pilot2ATC Part 2 канала Mark Fletcher