Flying IFR in X-Plane using Pilot2ATC Part 1
Title: Flying IFR in X-Plane using Pilot2ATC Part 1
Description:
This is Part 1 of a five-part series describing a typical IFR flight consisting of
a SID and a RNAV approach. Pilot2ATC is used in all ATC communication and is
emphasized throughout.
Flying IFR in X-Plane using Pilot2ATC
Part 1 - Introduction [THIS VIDEO]
Part 2 - Engine Start to Taxi https://youtu.be/06bqV2zX2vE
Part 3 - Takeoff to Approach https://youtu.be/iWGrpj2SdkU
Part 4 - Approach https://youtu.be/3k3YATAGKzY
Part 5 - Landing to Parking https://youtu.be/7nbXdGRrqs4
Table Of Contents - Part 1
Introduction 00:00
Tools 01:44
simBrief 04:24
SkyVector 07:52
Pilot2ATC 11:42
Configuring P2A 12:10
Charts in P2A 22:55
Building a flight plan in P2A 30:40
Determining cruising altitude 30:47
Entering and verifying the flight plan 36:45
Equipment and Software Used:
* Trim Pots used in my CH Pro Throttle
www.mouser.com
PN 248-9-10-503
* X-Plane 11.41
www.x-plane.com
* Pilot2ATC
pilot2atc.com
* X-ATC-Chatter
www.stickandrudderstudios.com/x-atc-chatter-overview
* XChecklist
forums.x-plane.org/index.php?/files/file/20785-xchecklist-linwinmac3264
* X-Camera
www.stickandrudderstudios.com/x-camera
* TrackIR 5
www.naturalpoint.com/trackir
* Propwash Simulation COM/NAV panels
https://www.propwashsim.com
* CH Products controllers
www.chproducts.com
Видео Flying IFR in X-Plane using Pilot2ATC Part 1 канала Mark Fletcher
Description:
This is Part 1 of a five-part series describing a typical IFR flight consisting of
a SID and a RNAV approach. Pilot2ATC is used in all ATC communication and is
emphasized throughout.
Flying IFR in X-Plane using Pilot2ATC
Part 1 - Introduction [THIS VIDEO]
Part 2 - Engine Start to Taxi https://youtu.be/06bqV2zX2vE
Part 3 - Takeoff to Approach https://youtu.be/iWGrpj2SdkU
Part 4 - Approach https://youtu.be/3k3YATAGKzY
Part 5 - Landing to Parking https://youtu.be/7nbXdGRrqs4
Table Of Contents - Part 1
Introduction 00:00
Tools 01:44
simBrief 04:24
SkyVector 07:52
Pilot2ATC 11:42
Configuring P2A 12:10
Charts in P2A 22:55
Building a flight plan in P2A 30:40
Determining cruising altitude 30:47
Entering and verifying the flight plan 36:45
Equipment and Software Used:
* Trim Pots used in my CH Pro Throttle
www.mouser.com
PN 248-9-10-503
* X-Plane 11.41
www.x-plane.com
* Pilot2ATC
pilot2atc.com
* X-ATC-Chatter
www.stickandrudderstudios.com/x-atc-chatter-overview
* XChecklist
forums.x-plane.org/index.php?/files/file/20785-xchecklist-linwinmac3264
* X-Camera
www.stickandrudderstudios.com/x-camera
* TrackIR 5
www.naturalpoint.com/trackir
* Propwash Simulation COM/NAV panels
https://www.propwashsim.com
* CH Products controllers
www.chproducts.com
Видео Flying IFR in X-Plane using Pilot2ATC Part 1 канала Mark Fletcher
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Navigating Special Use Airspaces With a Touch of Old SchoolThis is why we do this!Bird Strike!!Exploring New Mexico with FSEconomyIssues with Trim in Flight SimulatorstaildragginX-Plane 11 Crosswind Landing ChallengeFlying IFR in X-Plane using Pilot2ATC Part 5Shooting Approaches with the G1000nxiBuilding a Chippendale HighboyAirSpaces and Pilot2ATCX-Plane 11 Orth4XP terrain of Raleigh, NCFlying IFR in X-Plane using Pilot2ATC Part 4Taming the TorqueSim SR22Class E to Class D Cross-country FlightTwilight Over RaleighStuck Throttle EmergencyWhat is IFR Release?Shooting A G1000 Approach with a Course ReversalThe Emergency Landing!Yak54