Basic Router & Switch IOS configuration commands - CCNA beginner

In this video I cover the very basic router and switch IOS configuration commands that you will use in week 2 of my Cisco CCNA Introduction to Networks course:

You can download the text file from this video here: https://drive.google.com/open?id=13PgL3He2XAJZRdV2s4VeuRdxQ3dxouza

=================================
Basic Router Commands
=================================
Router(greater than sign) ---User EXEC mode exit
Router(greater than sign) ?
Router(greater than sign) enable
---------------
Router# ---Privileged EXEC mode disable, exit
Router# ?
-----------------
Router# configure terminal
Router(config)# ---Global Config mode exit, end, Ctrl+c, Ctrl+z
Router(config)# ?
-----------------
Router(config)# line vty 0 15
Router(config)# line console 0
Router(config-line)# ---Line configuration mode exit, end, Ctrl+c, Ctrl+z
Router(config-line)# ?
----------------------------
Router(config)# interface gigabitEthernet 0/0/0
Router(config-if)# ---Interface configuration mode exit, end, Ctrl+c, Ctrl+z
Router(config-if)# ?
----------------------------
Router#
Router# configure terminal
Router# show ?
Router# show running-config
Router# copy running-config startup-config
Router# ping 192.168.1.100
Router# traceroute 192.168.1.100
Router# ssh 192.168.1.100
Router# telnet 192.168.1.100
Router# debug ?
Router# clock set 07:14:00 October 15 2019
Router# reload
---------------------------------
Router(conf)#
Router(conf)# hostname R1
Router(conf)# banner motd "No unauthorized access allowed!"
Router(conf)# enable password class
Router(conf)# enable secret class
Router(conf)# service password-encryption
Router(config)# line vty 0 15
Router(config)# line console 0
Router(config)# interface gigabitEthernet 0/0/0
----------------------------------------------------
Router(config-line)#
Router(config-line)# password cisco
Router(config-line)# login
Router(config-line)# transport input all (line vty)
----------------------------------------------------
Router(config-if)#
Router(config-if)# interface gigabitEthernet 0/0/0
Router(config-if)# int g0/0 //command abbreviation
Router(config-if)# ip address 192.168.1.1 255.255.255.0
Router(config-if)# no shutdown
=================================
Basic Switch Commands
=================================
Switch(greater than sign) ---User EXEC mode exit
Switch(greater than sign) enable
---------------
Switch# ---Privileged EXEC mode disable, exit
-----------------
Switch# configure terminal
Switch(config)# ---Global Config mode exit, end, Ctrl+c, Ctrl+z
-----------------
Switch(config)# line vty 0 15
Switch(config)# line console 0
Switch(config-line)# ---Line configuration mode exit, end, Ctrl+c, Ctrl+z
----------------------------
Switch(config)# interface vlan 1
Switch(config-if)# ---Interface configuration mode exit, end, Ctrl+c, Ctrl+z
----------------------------
Switch#
Switch# configure terminal
Switch# show ?
Switch# show running-config
Switch# copy running-config startup-config
Switch# ping 192.168.1.100
Switch# traceroute 192.168.1.100
Switch# ssh 192.168.1.100
Switch# telnet 192.168.1.100
Switch# debug ?
Switch# clock set 07:14:00 October 15 2019
Switch# reload
---------------------------------
Switch(conf)#
Switch(conf)# hostname R1
Switch(conf)# banner motd "No unauthorized access allowed!"
Switch(conf)# enable password class
Switch(conf)# enable secret class
Switch(conf)# service password-encryption
Switch(config)# line vty 0 15
Switch(config)# line console 0
Switch(config)# interface vlan 1
----------------------------------------------------
Switch(config-line)#
Switch(config-line)# password cisco
Switch(config-line)# login
Switch(config-line)# transport input all (line vty)
----------------------------------------------------
Switch(config-if)#
Switch(config-if)# interface vlan 1
Switch(config-if)# ip address 192.168.1.2 255.255.255.0
Switch(config-if)# no shutdown
Switch(config-if)# exit
Switch(config)# ip default-gateway 192.168.1.1
Extra helpful commands:
=========================
Router(conf)# no ip domain-lookup //prevents miss-typed commands from being "translated..."
Router(conf-line)# logging synchronous //prevents logging output from interrupting your command input

Видео Basic Router & Switch IOS configuration commands - CCNA beginner канала danscourses