VLANs and Trunks for Beginners - Part 1
A quick tutorial on how to set up VLANs and Trunks for the Cisco CCNA. Using Packet Tracer, I demonstrate the basics of VLANs and how they function. In this series of tutorials, I will discuss the different types of VLANs: Default, Data Native and Management, and how they function.
See the whole series at http://danscourses.com
Видео VLANs and Trunks for Beginners - Part 1 канала danscourses
See the whole series at http://danscourses.com
Видео VLANs and Trunks for Beginners - Part 1 канала danscourses
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
VLANs and Trunks for Beginners - Part 2VLANs and Trunks for Beginners - Part 3VLANs and Trunks for Beginners - Part 4What is a VLAN?802.1Q and Trunking 101subnetting is simpleSpanning Tree Protocol Explained | Step by StepWhat is VLAN and Why VLAN?What are VLANs? -- the simplest explanationBasic Initial Cisco Switch ConfigurationVlans and trunks for beginners in HindiBasic Configuration of VLANS, Switchports and InterVLAN RoutingStandard Access List (ACL) for the Cisco CCNA - Part 1Inter VLAN Configuration plus IP- Helper AddressHow to Configure VLANS on a Cisco SwitchHow to Configure VLAN in Switch in Hindi | VLAN Configuration Step By Step | Vlan Configure HindiRouter on a Stick, Inter-VLAN Routing - Part 2How To Setup VLANS With pfsense & UniFI. Also how to build for firewall rules for VLANS in pfsenseOSPF Explained | Step by StepUnderstanding VLANS, TRUNK, NATIVE VLAN and Router on a stick - Cisco CCNA