Загрузка...
Все видеоНовые видеоПопулярные видео

Choose out of the given options what is required for orthographic projection in engineering drawing.

Choose out of the given options what is required for orthographic projection in engineering drawing.
To study the theory of orthographic projection the observer, plane of projection as well as the object these all three things are required.Hence all of these i.e. the option (d) will be the correct answer.
#orthographic
#projection
#object
#observer
#plane
#skilltechdrawing
#sanjaykhair
#viralshorts
#engineeringdrawing
#shortvideos

Видео Choose out of the given options what is required for orthographic projection in engineering drawing. канала Skill Tech Drawing
what are the things required for orthographic projection observer object and plane these three things are required to study orthographic projection kaunsi teen cheeje lagti hai orthographic seekhneke liye skilltechdrawing viral videoshort sanjaykhair
Комментарии отсутствуют
Информация о видео
21 мая 2025 г. 8:30:02
00:01:01
Skill Tech Drawing
Теги
Правообладателям
Жалоба на материал Недопустимый материал Нарушение авторских прав
Комментарии
Поделиться
Другие видео канала

Observe the form of thread shown in the figure and name the thread if the thread angle is shown 30°.Observe the form of thread shown in the figure and name the thread if the thread angle is shown 30°.

Four different images of solids are shown and asked to find out the solid with triangular surfaces.Four different images of solids are shown and asked to find out the solid with triangular surfaces.

Radial block views in orthographic।Elevation,Plan & End view of given block in 3rd angle projection.Radial block views in orthographic।Elevation,Plan & End view of given block in 3rd angle projection.

Plates with V-groove orthographic projection in 1st angle।Three views in first angle of an object.Plates with V-groove orthographic projection in 1st angle।Three views in first angle of an object.

Isometric view of a cube with square hole।A cube having vertical square through hole at the centre.Isometric view of a cube with square hole।A cube having vertical square through hole at the centre.

Taper block with cut on taper (Orthographic)। Views in 1st angle projection of slant surface object.Taper block with cut on taper (Orthographic)। Views in 1st angle projection of slant surface object.

An isometric block with views in First angle projection are given and asked to find out surface 'X'An isometric block with views in First angle projection are given and asked to find out surface 'X'

Draw isometric projection of a Hemisphere।Take diameter of hemisphere 80 mm।#hemisphere।#isometricDraw isometric projection of a Hemisphere।Take diameter of hemisphere 80 mm।#hemisphere।#isometric

Pictorial view of V-shape groove on plates।How to construct V-groove on horizontal & vertical platesPictorial view of V-shape groove on plates।How to construct V-groove on horizontal & vertical plates

Diagonal scale।Principle of similar triangles।#shorts।#shortsfeedsDiagonal scale।Principle of similar triangles।#shorts।#shortsfeeds

Term used when sum of two adjacent angles is equal to 180°।Two adjacent angles measures 180°।#anglesTerm used when sum of two adjacent angles is equal to 180°।Two adjacent angles measures 180°।#angles

What is the name of a line if path traced out by a point always changes its direction while drawing.What is the name of a line if path traced out by a point always changes its direction while drawing.

An isometric block shows the surface 'X'.Which number denoted in Front view represents that surface.An isometric block shows the surface 'X'.Which number denoted in Front view represents that surface.

Simple radial block in isometric form।The pictorial view of an object having L-shape with radial ribSimple radial block in isometric form।The pictorial view of an object having L-shape with radial rib

Orthographic views of an object with irregular surfaces।F,T&S of a block of irregular plane surfacesOrthographic views of an object with irregular surfaces।F,T&S of a block of irregular plane surfaces

How to draw a given Z-block in isometric drawing। Z-shaped block। Isometric view of a simple block.How to draw a given Z-block in isometric drawing। Z-shaped block। Isometric view of a simple block.

While aligning the protractor on a given straight line which is accurate method among the following?While aligning the protractor on a given straight line which is accurate method among the following?

Name the object formed if any pyramid cut parallel to its base।#pyramid।#frustum।#solidName the object formed if any pyramid cut parallel to its base।#pyramid।#frustum।#solid

Orthographic views of a vertical hollow cylinder in 1st angle।F,T&S of a cylinder vertically drilledOrthographic views of a vertical hollow cylinder in 1st angle।F,T&S of a cylinder vertically drilled

चित्रकला सीखें। Few Drawing Instruments। Engineering Drawing with less Drawing instruments। Rs.500/-चित्रकला सीखें। Few Drawing Instruments। Engineering Drawing with less Drawing instruments। Rs.500/-

Solids।Identify which solid is shown in the figure given।Top & bottom pentagon & rectangles around.Solids।Identify which solid is shown in the figure given।Top & bottom pentagon & rectangles around.

Статистика портала
Яндекс.Метрика
© 2008-2025 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения Пользовательское соглашение Соглашение о конфиденциальности Согласие на обработку персональных данных Информация для правообладателей Об использовании Cookies
salda.ws@mail.ru
Сейчас на сайте: 427 Статистика портала
Страницу в закладки Мои закладки
Все заметки Новая заметка Страницу в заметки