Build Subwoofer Box For Skar SVR 10 || Jeep Mods E30

Built a ported subwoofer box out of scrap wood for our Skar SVR 10 powered with a JL M600 amplifier at 200 watts. The subwoofer box has a hair over 2 cubic foot with the ports. The ports stick out of the subwoofer box to give us more airspace for the Skar SVR 10. The box is 30 inches wide, 16 inches tall, and 9 inches deep, the ports are 20 inches long with 5 inches of the port outside the box. The frequency response of the box comes in at around 26 Hz and starts to fade at 90 Hz. Shop Stuff We Use Skar SVR 10: https://amzn.to/3ecsa5u JigSaw: https://amzn.to/2ZuD2aA Gorilla Wood Glue: https://amzn.to/3bYxFD8 Milwaukee 2691-22 18-Volt Compact Drill and Impact Driver: https://amzn.to/3cW3VrL The box sounds much better with music than just doing a bass test but we are trying to give you real numbers. We could feed a lot more than 200 watts to this subwoofer with the Skar SVR 10 but we think this is plenty loud and does not overpower the rest of the sound. It is really hard to get good bass in a jeep, this is why the ports point toward the corners of the jeep. To jump to points in this video: 1:30 What we don't like about the old Skar SVR 10 box 2:44 Port location on subwoofer box for the best bass 3:53 Building the Jeep Subwoofer Box for the Skar SVR 5:37 Installing Port for Subwoofer Box with Skar SVR 10 6:59 How To cut a speaker hole in a box. 8:15 Putting in the Skar Subwoofer in a ported box. 8:57 Creating texture with normal paint for the Skar SVR subwoofer box 9:43 Wiring and Sealing our Skar SVR Subwoofer in the custom box 11:23 Testing Frequency Response of the Skar SVR Subwoofer In our Custom Box 12:18 The dimensions of custom subwoofer box for the Skar SVR 10 12:42 Our final thoughts of the Skar SVR 10 Sub and Custom Box Check out our shop on our website for branded gear: https://www.chrisdoeswhat.com/our_shop/ Support us by shopping through our Amazon link, cost nothing to you and really helps us out. https://amzn.to/351krTR You Can Also Follow Us On: https://www.facebook.com/ChrisDoesWhat/ https://www.instagram.com/chrisdoeswhat/ https://www.instagram.com/dininginwithdanielle/ https://www.pinterest.com/ChrisDanielleRedding/ Before doing anything related to things we do, here is the Legal Stuff: Disclaimer: https://www.chrisdoeswhat.com/disclaimer/ Privacy Policy: https://www.chrisdoeswhat.com/privacy-policy/ Terms Of Use: https://www.chrisdoeswhat.com/terms-of-use/ You can also follow us on our blog: https://www.chrisdoeswhat.com/ Or go directly to cooking: https://www.dininginwithdanielle.com If you have a request, please see our blog and go to contact. https://www.chrisdoeswhat.com/contact-us/ Video & Blog Productions: Florida Landscapes Explore Florida Recipes with Danielle DIY and HowTo Reviews Boat Restore Playlist: https://youtu.be/AWXqtJuseII Explore Florida Playlist: https://www.chrisdoeswhat.com/y_explore_florida Jeep Mods Playlist: https://youtu.be/9EwWEwSmZm0 Recipes Playlist: https://youtu.be/rO7LOGQ1Dgg Equipment: All videos are edited with Sony VEGAS Pro https://amzn.to/2GrzE77 Our video studio does have a green screen with umbrella lighting https://amzn.to/2BVIlpq All recording equipment is Sony and our main camera is the HDR-CX675 offering servo steadied filming and 5.1 sound. https://amzn.to/2BlJxQb Affiliate Links: - Shop Amazon at no cost to you, and helps our channel: https://amzn.to/2SMfsjS - Best Blog Hosting: https://www.bluehost.com/?utm_source=www.chrisdoeswhat.com&utm_medium=affiliate&utm_campaign=affiliate-link_chrisdoeswhat_notype The content on our YouTube Channel is only intended for adults. The Skar Audio SVR-10 10-inch dual 2-ohm car subwoofer delivers hard-hitting bass in a compact, powerful package. The SVR-10 was engineered and built with performance in mind. It starts with a unique 2.6" 4-layer high-temperature copper voice coil, allowing it to have a conservative peak power rating of 1,600 watts. The Skar Audio stamped steel basket featured on the SVR-10 utilizes an advanced air flow cooling system to help dissipate heat, enabling it to provide continuous reliable power. The SVR-10 is equipped with a double-stacked 153 oz ferrite motor, which delivers the driving force behind the ultra-responsive, breathtaking lows this subwoofer produces. The suspension design of the SVR series features the Skar Audio signature red, single-layer spider, which connects to the coil former with premium stitched lead wires. Furthermore, the SVR-10 comes with a high foam surround stitched to a competition grade pressed paper cone. The advanced design features in the SVR series help to deliver powerful bass with uncompromising accuracy, that place this subwoofer in an elevated class of its own. RMS Power Handling 800 Watts Peak Power Handling 1,600 Watts Voice Coil Size 2.6" Voice Coil Configuration Dual 2 Ω #ChrisDoesWhat #DiningInWithDanielle #HoMaidChef

Видео Build Subwoofer Box For Skar SVR 10 || Jeep Mods E30 автора Мифы и легенды рыбалки: тайны и истории