How to Operate the Sterlitech Forward Osmosis Filtration System

Check out this visual guide on how to operate the Sterlitech Forward Osmosis Filtration System. Sterlitech Benchtop Forward Osmosis Filtration System The compact, intuitive design of the Benchtop Low Pressure Filtration Unit can be adapted to form either a Forward Osmosis or Membrane Distillation System. Either configuration has the option to log the pressure and flow data of both units simultaneously. The FO configuration utilizes carboys for applications not requiring temperature control. System Features: Cell Type: FO Flat Sheet Cells Configuration: 1 Line, No Bypass Feed Flow Rate: 3.2 LPM (0.84 GPM) Max Pressure: 5.5 bar (80 psi) Max Temperature: 82C (180F) Electrical Supply: 110V/230V, 50/60Hz, 1Ph Motor Rating: PTFE and PEEK MicroPump Data Recording: Option Available Feed/Draw Tanks FO: Polycarbonate, 10 Liter (2.5 Gallon) Capacity System Dimensions FO: 132 cm x 42 cm x 40 cm (52 in x 17 in x 16 in) ==================== Follow these steps to set up the Sterlitech FO Filtration Kit 1. Put membrane in the cell 2. Assemble the cell 3. Tighten the knobs 4. Fill the tanks 5. Plug in the pumps 6. Turn the pumps on 7. Set the pump speeds using speed knobs 8. Adjust the pressure using the pressure control valves 9. Re-adjust the speed if needed *Note the change in weight on the scale ==================== Interested in Sterlitech benchtop FO filtration kits? Find the perfect plug-and-play unit for your RO, NF, UF, or MF experiments here: https://tinyurl.com/2byhh5yb For other product inquiries, contact us here: https://tinyurl.com/58chxh53 or call us at 1-877-544-4420

Видео How to Operate the Sterlitech Forward Osmosis Filtration System автора Дифференциальные дивертисменты