etrailer | Vision X Off Road Lights - Light Bar - XIL-LPX940 Review

Click for more info and reviews of this Vision X Off Road Lights: https://www.etrailer.com/Off-Road-Lights/Vision-X/XIL-LPX940.html https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-Demo-Vision-X-Lights-XIL-LPX940.aspx Today, we're going to review part number XIL-LPX940. This is the Vision X Xmitter 45-Watt LED LoPro Prime Xtreme Light Bar with a flood beam design. Now, this part number includes everything shown here on the table, the light bar, the wiring harness with the toggle switch, two mounting hardware pieces, and an Allen wrench. Now, this is a low-profile LED light bar, produces a bright flood beam. It does a wide 40 degree flood beam which is ideal for low speed off-road driving and industrial applications. This is a slim design, so it allows for mounting in compact spaces. This light bar has superior light output from a single row of nine 5-watt LEDs which gives you your 45-watt output. Now, this light can be dimmed to 50% using the Vision X dimmers. They sell two different ones. One is a dial-control. The other is a push-button control. We do sell those separately, and they are listed on the product page of this part number as a related product. Now this will give you maximum efficiency with minimal heat. The premium LEDs have a 50,000-hour lifespan and are driven to 90% of the light emitting potential. It does use Electronic Thermal Management which is ETM technology and pulse-width modulation which allows for highest potential light output at all time. On the very back of the light bar, you can see it has the channeled fins right here. This will let heat quickly dissipate when air goes over it. It is a durable weather-resistant construction. It has a nice rugged black powder-coated aluminum housing which is lightweight and rust-proof. Now, the two mounting brackets, they use high-tensile stainless steel bolts withstands vibration. These brackets also have a little rubber piece that the bolts go through, and that will help as far as the vibration. Now, the lens on this is an impact-resistant polycarbonate lens. It has a scratch-resistant coating. It is a very easy installation. It uses these included components. Basically, you can mount this light to your roof, your row bar, bumper, grill guard, or grill bar. It gives you a nice rugged look. The universal mounting feet will allow for up to 15 degrees of adjustment. Just when I show you that on the bottom of the light, you'll see two long slots with the larger hole in the center. What you do is take the bolt, drop it through the hole in the middle, then you slide it over into the slot. Do the same on this one. Drop it too, slide it over, and you're ready to tighten it down to mount it. What I'm going to show you is this slides into a cylinder. You can see, that actually rotates. That gets you your 15 degrees of adjustment. When this is bolted down, you'll be able to move that light bar 15 degrees. Once you get it in a spot and you don't want it to move, the included Allen wrench, you could just put on the Allen bolts on the edge and tighten it, so it won't rotate anymore. Now, I want to do mention this wiring harness that it comes with. Put this back over. Now, this wiring harness has a toggle switch for on and off capabilities. The switch is connected to about 10-foot length of cord, so you can actually install this toggle switch where you would like it. Also, includes the relays, the inline fuse holders. All these wire in here is a 14-gauge size wire. The other nice thing on this is the end that plugs into your light bar is an actual industry standard triple-sealed Deutsch connector. What I want to try to show you, maybe if we zoom in a little bit, you get a good idea. That should be good. If you'll see this orange ring right around here, that's an actual triple-rubber seal. What happens is when you . There's your pins that you'll plug into. Here's the connector on the light bar itself. When you take this Deutsch connector, line it up, slide it in. It's very snug. Those triple-seals are sealing it, and you push it all the way in. It will clip and lock into place right up here, and then you'll have a nice weather-proof connector, so no elements can to get to that connection. Then when you want to remove it, just push down, and pull it right out. Very simple connection. Now, a few specs on this. It is 9-diodes. Let's just go back out. There we go. It is 9-diodes. There are 45 watts total wattage, 5 watts per LED. The power draw in this is 3.75 amps. The input voltage is 9 volts to 32 volts DC. It does come with a limited lifetime warranty. Now, the light output itself, the effective lumen output on this is 3,330 lumens. The raw lumen output is 4,752 lumens. When this is turned on, the beam that comes out of it is 426 feet long and about 89 feet wide. It is a wide 40 degree flood pattern. Approximate dimensions on this, overall length is a

Видео etrailer | Vision X Off Road Lights - Light Bar - XIL-LPX940 Review автора ТехноИнновации