JessEm Rout-R-Lift Prestige – Metric

BUY ONLINE NOW… https://woodworkersworkshop.co.uk/jessem-rout-r-lift-prestige-metric/ Peter Sefton talks about our JessEm Rout-R-Lift Prestige - Metric - the premium metric router lift set within a 9.5mm aluminium plate, that fits European hand held routers including Pre-Drilled Plates for Festool OF1010, Festool OF1400, DeWalt 625, Trend T11, ELU 177 and 3337-9, Makita RP2301 and RP2300, Hitachi M12V and M12V2, Bosch 1617, 1604 and 1613 Routers. Or you can buy an Undrilled Plate version and drill it to fit your own router. The direct drive rise and fall mechanism works via a metric screw and gives endless years of accurate and reliable service, without the issues associated with poorer quality belt or chain driven drives that tend to clog, work loose and snap over time. Make life easier! No more scrambling under the table trying to push your router up - all our American-style router lifts allow for height adjustment of the router from above the table. A robust cranked handle operates the double bearing spindle from above the table with great precision and ease. The effortless and positive winding action is measured by the metric scale built into the router plate’s surface giving very accurate incremental calibration of the rise before ultimately using the same cranked handle to lock off the mechanism. Both the height adjustment and locking mechanism are located on the front edge of the router lift plate, meaning you won’t have the hassle of having to move your router fence to make adjustments when in use. The built in spindle height lock ensures no height loss or movement whilst the router is in use. The 9.5mm thick-cast, precision ground and anodized black solid aluminium top plate is very strong and flat and will not flex or bend in use. The plate measures 235mm x 298mm and will accommodate large diameter cutters up to 92mm and can be reduced down to 51mm using the glass filled poly-carbonate insert ring included (other ring sets are available). All JessEm plates come with their own levelling system allowing for perfect alignment and levelling and fit our own JessEm and INCRA table tops or use our router insert plate template for home-made tables for a perfect fit. Fitting your router to the lift is very quick and simple; the lift has a low profile plate pre-drilled for the most popular routers on the market. Place your router on the plate, match your fixing holes and screw it in place. Raise your router to its maximum plunge and lock it off, the Prestige will now do all the height movement for you in one easy and accurate movement. If you have a router that is not catered for within the pre-drilled plate list then undrilled version is available. The router plate and fixing plate are low profile but to make your original router even better you can use it with our Xtreme Xtension, for above the table cutter changes. Please note that the fixing screws are individual to your router are available from the manufacturer, and should have been supplied originally.

Видео JessEm Rout-R-Lift Prestige – Metric автора Простые инструкции для строителей