1996 Jeep Grand Cherokee Stall Fix - Super Easy - Must Try!! Its not your Crankshaft Position Sensor

I've been trying to get my Jeep running right for years now. Every time it got up to temperature it would start to sputter and stall and run outright whacky!! I've followed the forums and watched every video. I replaced the Idle Air Valve, Throttle Position Sensor, coil, distro cap, rotor and wires. I was gonna replace the crank shaft position sensor but that just sux to do!! I set out today to see if anything would work as I played with all of the wires and the leads to the CPU when I took out the lead on the left of the car and it fired up so I cleaned the connectors with simple contact cleaner and it's been running great since! Such an easy fix!!! It seems that there was just enough corrosion and or dirt so that when the connections heated up they would start losing contact. You can hear my amazement when it actually works. Hope this helps you too!!!

Видео 1996 Jeep Grand Cherokee Stall Fix - Super Easy - Must Try!! Its not your Crankshaft Position Sensor канала C Note