Lineal strip Drain cover

KHD are proud to partner with Hide covers.
He we have their Lineal Strip Cover
Covers a 20mm deep recess with a width of 125mm or 112mm
Compatible with Everhard (ED) or Reln (SM) channel
(ED & SM channel not included)
Easily Removed Modular lengths @ 1210mm
Cover Depths to suit 10, 20 & 30mm tile or stone
Adjustable height & clearances
Centralising Tabs; A world first in design
90º Mitred corner kit option
Inlay with your selected surface finish
10 year warranty
Flexible installation features
No equipotentially bonding required
Adjust modular lengths to tile widths, S/S Cutting disc included

A recess in the slab 20mm deep channel for widths 125mm or 112mm.
Or set up a drainage network with the available channels:

125mm is Compatible with Everhard easy drain (ED)
112mm is Compatible with Reln Storm Mate (SM)

Note: Channel installation as per manufacturers instructions

The channel must be flush with the tile fixing height (slab level), as the Linear Drain Cover sits above the channel, flush with the top of the tile.

Three depths to suit stone from 8mm to 32mm thick

Flexibility with 1210mm modular lengths
One finishing kit is required per project
Optional tile edge trim 316 Stainless
Prefabricated 90ø Corner kits
(see table below for all specifications)

NOTE: It is very important that your tile layer understands the installation process of this product and the additional height requirements before fixing the channel drain. Some additional information here: Video

Set out ED or SM channel drain at slab level (under tile height). Install the HIDE Linear Drain System above the channel at the finished tile height. The ‘Tabs’ allows up to 10mm of height adjustment if required. Bend down ‘tabs’ at either end to centralise the HIDE System and keep the spacing even along the drain. If required adjust the heights using level adjusters’, (supplied) and use the ‘Adhesive’ (supplied) to fix components into position.

Видео Lineal strip Drain cover канала KHD Landscape Engineering Solutions