SoildWorks - J's Tutorials - CSWA Advanced parts - Part 18 - Advanced Revolve

🎥 Part 18 enters deeper into the world of advanced modeling with a powerful tool combo: Revolve + Circular Pattern Cuts.
We’re modeling a flywheel, a part found in everything from engines to heavy machinery—and this one puts precision and symmetry to the test.

Below is the link to a drive where you can find the drawings for this part.
https://drive.google.com/drive/folders/1sAqb7COlkVY-CMj0VtuR-sW-8hVp1FcJ?usp=drive_link

Here’s what you’ll take away:

✅ Building a Flywheel using a detailed Revolve feature
✅ Creating cutouts evenly spaced around the wheel
✅ First serious use of Circular Pattern in Extrude Cuts
✅ Thinking in sections: modeling the part once, then editing
✅ Balancing geometry and mass like a mechanical designer
✅ Design intent matters here—every cut affects performance
✅ Real-world skills for symmetry, pattern logic, and time-saving

This is a go-to part for reinforcing revolve logic and patterning strategy—especially for those aiming toward CSWP-level work.

🔧 Software Used: SolidWorks
📏 CSWA/CSWP-Aligned Topics: Revolved geometry, circular cut patterns, mechanical part design
📚 Advanced Series – Rotational Power in Practice
Mass Properties of Part 18 Pre Edits
Mass = 231611.84 grams
Volume = 27248452.21 cubic millimeters
Surface area = 1887976.82 square millimeters
Center of mass: ( millimeters )
X = 0.00
Y = 0.00
Z = -53.46

Mass Properties of Part 18 with Edits
Mass = 330460.24 grams
Volume = 38877675.20 cubic millimeters
Surface area = 2362066.97 square millimeters
Center of mass: ( millimeters )
X = 0.00
Y = 0.00
Z = -80.00

👍 Like, comment, and subscribe—we’re building parts with real-world function, one revolution at a time.

Видео SoildWorks - J's Tutorials - CSWA Advanced parts - Part 18 - Advanced Revolve канала Jaymo