Mastering XBEE - Lesson 2 - S2C PinOut

This Video series on XBEE modules makes you understand the XBEE protocol and wireless RF functioning using S2C XBEE.
XBee S2C RF Module offers secure network-based wireless communication. In XBee S2C communication the device transfers the data with 2.4GHz speed .It offers multiple communication methods.
Additionally, it has some GPIO pins which are useable directly with the XBee module
It can communicate up to 400ft in the closed area
It uses a frequency range of 2.4-2.5GHz and has 16 sequences of channels.

Lesson 1 -Getting Started
https://youtu.be/Fug2-nrVV2c

Lesson 2 - S2C PinOut
https://youtu.be/zng9AqaTFP0

Lesson 3 -USB driver & XCTU Software
https://youtu.be/ODrkVN6vUgw

Lesson 4 - Device Types & Network Topologies
https://youtu.be/0mRdn6FHN_g

Lesson 5 -Level Shifters
https://youtu.be/qTPQfsuxooc

Lesson 6 - Firmware Update
https://youtu.be/lya0-LFmEOs

Lesson 7 - Addressing Modes & AT Commands
https://youtu.be/KdpvPdY_S3E

Lesson 8 - Packet Data Transmission
https://youtu.be/C3xjzCpqqQU

Lesson 9 - Digital Data Transmission & I/O Line Passing
https://youtu.be/pcAd29Hvvq0

Lesson 10 - ANALOG Data Transmission
https://youtu.be/QbNzeoYOp1A

Lesson 11 - Dual Analog Transmission I/O Line passing
https://youtu.be/nyqfhlMqzLU

Lesson 12 - Controlling 4 CH RELAY Board
https://youtu.be/2TLCY3hUnH8

Видео Mastering XBEE - Lesson 2 - S2C PinOut канала Saravanan AL