They Wink! | Blinking Iris Goggles | Live Stream

The Goggles now can wink, I have a lot of lessons learned you won’t want to miss in this video.

~~RECAP
Digispark - Will not work to drive both servos because it can only use the SoftRCPulseOut Library.

SoftRCPulseOut - does not work to drive two servos quickly. The commands require a delay to move the servos and when commanding two servos at the same time the delays will mess things up....or at least that's how I understand it.

Arduino Pro Micro - can run the standard servo library and is what I will be using from now on.

5V Step up converter - Adding a step up converter to power servos and Arduino because the 5v reg on the Arduino can not supply enough current to power both servos.

Lipo Battery Pack - Adding a lipo battery to power the goggles.

Latching power switch - Adding a power switch that can be pressed to turn power on or off.

LINKS TO LEARN~~~~~~~~~~~~~~~~~~~~~~~~~~~
Original Blinking Iris Goggles Models:
https://www.thingiverse.com/thing:1833286

Neatherbot 3D Print Files (.STL): http://bit.ly/2oUlBeY
facebook.com/neatherbot
Neatherbot.com

LINKS TO BUY~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Digispark Arduino Board: http://amzn.to/2z9hD9P

9g Servos: http://amzn.to/2A6aYvd

IR LEDs: http://amzn.to/2gVMwEB

3D Printer Filament (Colorfabb): http://amzn.to/2xJXROt

Creality CR-10 Printer: http://amzn.to/2zch6nF
CR-10 Banggood: http://bit.ly/2iSeTaK

Breadboard Jumper wires: http://amzn.to/2zXOgnW

Breadboard: http://amzn.to/2z9RB6i

Soldering Iron: http://amzn.to/2zYDKgu

Servo Tester: http://amzn.to/2iUNAMT

Hot Glue Gun (2mm Tip): http://amzn.to/2A7Sfj0

Exacto knife: http://amzn.to/2zoe8NL

Tweezers: http://amzn.to/2xL0YWG

Flush Cutters: http://amzn.to/2xQXwd1

Crimping Tool: http://amzn.to/2ztszNL

Wire Strippers: http://amzn.to/2AsrtC5

Blue Tack: http://amzn.to/2yIhtmO

Видео They Wink! | Blinking Iris Goggles | Live Stream канала NeatherBot