K Swap Ferrari - From CAD to Finished Part with No Special Tools! How to Build Motor Mounts Pt. 2

A special thanks to Nic Foster for taking the time to teach me everything I know about CAD work and how to make these 1:1 templates, so that I can show you guys.

I've found CAD to be one of the most helpful tools in my arsenal, despite not having a CNC or anything like it. I wanted to show how helpful designing parts on the computer can be, and how to easily take a design from concept to finished part.
From beginners to pros, I'm hopeful plenty of folks will find some of the tips here useful. And if not, enjoy the process either way! The 4th motor mount for the K24-swapped Ferrari 308 is finished up.

StanceWorks 2021 Content Sponsors:
H&R Springs
RS Future
Nitto Tire
CSF Radiators

Be sure to follow StanceWorks on Instagram: @StanceWorks

Follow me personally on Instagram at @mike_stanceworks

Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com

Last but not least, check out the rest of the gang that helps to make this project happen:
www.rsfuture.com

Timecodes:
00:00 - Intro
01:16 - The Objective
02:14 - Drawing up the part in CAD
03:47 - Creating a 1:1 Paper Template
05:00 - Cutting Out The Arm
05:46 - Drilling Holes
06:58 - Bending the Arm
09:22 - The Test Fit
09:45 - Building the Bushing Mount (Time Lapse)
10:25 - Test Fit #2
11:25 - "Speed Holes"
12:59 - TIG welding the Arm to the Bushing Mount
13:37 - The Finished Motor Mount
14:25 - Outro

Видео K Swap Ferrari - From CAD to Finished Part with No Special Tools! How to Build Motor Mounts Pt. 2 канала StanceWorks