MKS GEN L For 4 Axis CNC Foam Cutters - Part1
#usbfoamcutter #grbl #free-software
How to use the MKS GEN L board for 4 axis CNC Foam Cutters. This is an Arduino Mega 2560 with a RAMPS board as one unit. It has a couple of nice features for CNC Foam cutters.
1. Use a 24-volt power supply that can power the hot wire as well.
2. External connectors for high current stepper drives using NEMA 23 motors or bigger.
This part 1 video includes all the firmware, software and electronics set-up including bench tests. Part 2 out soon will show it installed on the foam cutter, calibration checks and cutting a wing.
More details here https://rckeith.co.uk/use-the-mks-gen-l-board-for-cnc-foam-cutting/
Full Parts List here https://rckeith.co.uk/usb-hot-wire-cnc-foam-cutter-parts-list/
Chapters
00:00 Intro
04:40 NEMA17 Onboard Driver Parts
13:14 Installing Firmware & Software
22:16 OnBoard Driver Micro-Stepping and Installing
29:50 Setting Driver Current Vref
33:37 NEMA17 Bench Test
46:18 Homing End-Stop Connections
50:45 NEMA23 External Drivers
53:08 Parts External Drivers
57:28 External Drivers Micro-Stepping & Current Settings
59:36 NEMA23 Wiring
1:07:00 NEMA23 Bench Test
1:14:56 What's coming in Part 2
Видео MKS GEN L For 4 Axis CNC Foam Cutters - Part1 канала Keith Howlette
How to use the MKS GEN L board for 4 axis CNC Foam Cutters. This is an Arduino Mega 2560 with a RAMPS board as one unit. It has a couple of nice features for CNC Foam cutters.
1. Use a 24-volt power supply that can power the hot wire as well.
2. External connectors for high current stepper drives using NEMA 23 motors or bigger.
This part 1 video includes all the firmware, software and electronics set-up including bench tests. Part 2 out soon will show it installed on the foam cutter, calibration checks and cutting a wing.
More details here https://rckeith.co.uk/use-the-mks-gen-l-board-for-cnc-foam-cutting/
Full Parts List here https://rckeith.co.uk/usb-hot-wire-cnc-foam-cutter-parts-list/
Chapters
00:00 Intro
04:40 NEMA17 Onboard Driver Parts
13:14 Installing Firmware & Software
22:16 OnBoard Driver Micro-Stepping and Installing
29:50 Setting Driver Current Vref
33:37 NEMA17 Bench Test
46:18 Homing End-Stop Connections
50:45 NEMA23 External Drivers
53:08 Parts External Drivers
57:28 External Drivers Micro-Stepping & Current Settings
59:36 NEMA23 Wiring
1:07:00 NEMA23 Bench Test
1:14:56 What's coming in Part 2
Видео MKS GEN L For 4 Axis CNC Foam Cutters - Part1 канала Keith Howlette
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DevFus Foam 2 Tutorial BAE Hawk T45 Goshawk - Part 6Montando minha impressora 3D Core XY - Episódio Piloto - PréviaMKS GEN L V1.0 For 4 Axis CNC Foam Cutters - Part 2MKS Gen L - Dual Axis SteppersGRBL HotWire Mega 5X Update v5.01 - CNC Foam CuttersGRBL HotWire Mega 5X Update v3.2 - CNC Foam CuttersHow to Cut Polystyrene FoamGRBL Ramps 1.4 hot wire foam wing cutter cncFusion 360 for 4 axis CNC Foam Cutters - Parallel Cuts Only - Part 1My DIY CNC Router buildCNC Hot Wire Foam Wings made using Free Software - LinuxCNCBuilding an X-Carve Folding TableHow to Build a USB Hot Wire CNC Foam Cutter - Part 2 Electronics - UpdatedDIY 4 Axis CNC Foam Cutter (Hot Wire)CNC Foam Cutting - Where to Buy - no PC required -Jedicut fixDIY 4 axis foam cutter and DevCNC FoamHow to build A CNC machine _ DIY CNC millGrblGru: 5-axis CNC machine controlled with Mega-5XLaser Engraver upgrade with MKS DLC V2.0 and MKS TFT24 v1.1 offline controllerHow to Cover Wings and Fuselages in Brown Paper and White Glue makes a very strong wing.