MCITP 70-640: Group Policy Software Install Demonstration
This video looks at how to install, upgrade and remove software using Group Policy. The video also looks at how to set up a software share to store the install files and how software can be assigned and published.
Download the PDF handout for this video from http://ITFreeTraining.com/handouts/70-640/part3/gpsoftwaredeployment.pdf
GP Software Deployment
Before software is installed using Group Policy a test is done to see how fast the connection is. By default, if the connection is less than 500Kbps per second it will be considered slow. Group Policy will not install software over a slow link due to the time it would take to transfer the install files over the network. If you want to change the speed in which Group Policy tests for a slow link, this can be done at the following location.
Computer Configuration\Policies\Administrative Templates\System\Group Policy\Group Policy Slow Link Detection
Demonstration
In order to install software using Group Policy, the install files must be able to be read by the computer applying the Group Policy. The install files can be on the local computer but it is generally easier to put them on a file share. To share a folder, open the properties for that folder and select the sharing tab. For installing software, you only need to ensure that the read access is configured.
The settings for software installation in Group Policy are found in both user and computer configuration. They are found under Polices\Software Settings\Software Installation
To set up a new software deployment. Right click Software Installation and select, "new package".
A dialog will appear giving you the following options: published, assigned or advanced. Published will be greyed out for computer configuration. If you choose published, some options may not be changeable later on so it is recommenced to choose Advanced so all options can be changed later.
There are many options that can be configured in the properties for the software install some are listed below.
Uninstall the application when it falls out of the scope of management: If this option is ticked, the software will be uninstalled automatically when the Group Policy is no longer being applied to that user or computer.
Modifications tab: This tab allows you to assign an MST file to the package. An MST file can be created
to configure options in the MSI package. The manufacture of the software may have released an application that will create an MST file. An example can be found for Acrobat Reader at the following address. http://www.adobe.com/support/downloads/detail.jsp?ftpID=4950
Upgrades tab: On this tab you can upgrade existing packages.
If software has been published, it can be installed by opening Programs and Features in the control panel and then selecting the option, "install a program from the network".
If you want to redeploy an application, this can be done by right clicking the application, selecting all tasks and then selecting the option, "Redeploy application". You can also remove the application from all tasks if you want to. If you remove the application, you will get the option to allow the users to continue using the package or to remove the package straight away.
See http://YouTube.com/ITFreeTraining or http://itfreetraining.com for our always free training videos. This is only one video from the many free courses available on YouTube.
References
"MCTS 70-640 Configuring Windows Server 2008 Active Directory Second Edition" pg 353 -- 361
"Upgrade an application" http://technet.microsoft.com/en-us/library/cc783421(v=ws.10).aspx
"Specifying Group Policy for Slow Link Detection" http://technet.microsoft.com/en-us/library/cc781031(v=ws.10).aspx
Видео MCITP 70-640: Group Policy Software Install Demonstration канала itfreetraining
Download the PDF handout for this video from http://ITFreeTraining.com/handouts/70-640/part3/gpsoftwaredeployment.pdf
GP Software Deployment
Before software is installed using Group Policy a test is done to see how fast the connection is. By default, if the connection is less than 500Kbps per second it will be considered slow. Group Policy will not install software over a slow link due to the time it would take to transfer the install files over the network. If you want to change the speed in which Group Policy tests for a slow link, this can be done at the following location.
Computer Configuration\Policies\Administrative Templates\System\Group Policy\Group Policy Slow Link Detection
Demonstration
In order to install software using Group Policy, the install files must be able to be read by the computer applying the Group Policy. The install files can be on the local computer but it is generally easier to put them on a file share. To share a folder, open the properties for that folder and select the sharing tab. For installing software, you only need to ensure that the read access is configured.
The settings for software installation in Group Policy are found in both user and computer configuration. They are found under Polices\Software Settings\Software Installation
To set up a new software deployment. Right click Software Installation and select, "new package".
A dialog will appear giving you the following options: published, assigned or advanced. Published will be greyed out for computer configuration. If you choose published, some options may not be changeable later on so it is recommenced to choose Advanced so all options can be changed later.
There are many options that can be configured in the properties for the software install some are listed below.
Uninstall the application when it falls out of the scope of management: If this option is ticked, the software will be uninstalled automatically when the Group Policy is no longer being applied to that user or computer.
Modifications tab: This tab allows you to assign an MST file to the package. An MST file can be created
to configure options in the MSI package. The manufacture of the software may have released an application that will create an MST file. An example can be found for Acrobat Reader at the following address. http://www.adobe.com/support/downloads/detail.jsp?ftpID=4950
Upgrades tab: On this tab you can upgrade existing packages.
If software has been published, it can be installed by opening Programs and Features in the control panel and then selecting the option, "install a program from the network".
If you want to redeploy an application, this can be done by right clicking the application, selecting all tasks and then selecting the option, "Redeploy application". You can also remove the application from all tasks if you want to. If you remove the application, you will get the option to allow the users to continue using the package or to remove the package straight away.
See http://YouTube.com/ITFreeTraining or http://itfreetraining.com for our always free training videos. This is only one video from the many free courses available on YouTube.
References
"MCTS 70-640 Configuring Windows Server 2008 Active Directory Second Edition" pg 353 -- 361
"Upgrade an application" http://technet.microsoft.com/en-us/library/cc783421(v=ws.10).aspx
"Specifying Group Policy for Slow Link Detection" http://technet.microsoft.com/en-us/library/cc781031(v=ws.10).aspx
Видео MCITP 70-640: Group Policy Software Install Demonstration канала itfreetraining
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Installing Software Using GPO](https://i.ytimg.com/vi/jXAz6vrWMP0/default.jpg)
![MCITP 70-640: Group Policy Software Installation Introduction](https://i.ytimg.com/vi/d4csE_kSyqs/default.jpg)
![](https://i.ytimg.com/vi/zO8PNow6XFM/default.jpg)
![MCITP 70-640: AppLocker](https://i.ytimg.com/vi/ab5IGQr70-g/default.jpg)
![Integrate Synology NAS with Active Directory AD - How To Guide](https://i.ytimg.com/vi/S8Y4WWcJejI/default.jpg)
![how to deploy apps or software using group policy in windows server 2012 r2](https://i.ytimg.com/vi/WObHF7VajnI/default.jpg)
![How to Deploy Software (MSI Packages) Via Group Policy (GPO) | Windows Server 2019](https://i.ytimg.com/vi/tDpGM8SQYP4/default.jpg)
![How to remove deployed software and how to redeploy them using group policy managment](https://i.ytimg.com/vi/0NE2wDs83zE/default.jpg)
![70-410 Objective 6.1 - Understanding Group Policy Management on Windows Server](https://i.ytimg.com/vi/azup50LaIN0/default.jpg)
![MCITP 70-640: Troubleshooting Group Policy](https://i.ytimg.com/vi/cM2TjEsPy5o/default.jpg)
![Fix Software Deployment failed when using GPO | Group Policy Error deploying MSI software](https://i.ytimg.com/vi/UChoGiuC-ZA/default.jpg)
![MCITP 70-640: Group Policy Introduction](https://i.ytimg.com/vi/ccHpEyl6Vnk/default.jpg)
![Software Installation via GPO](https://i.ytimg.com/vi/o5rlgBIi6Y8/default.jpg)
![Server Basics (15) | Deploy Apps via Group Policy (GPO)](https://i.ytimg.com/vi/ZOhzJstcK0k/default.jpg)
![MCITP 70-640: Active Directory Password Polices](https://i.ytimg.com/vi/LS4S4Ice1Jg/default.jpg)
![Introduction to Group Policy](https://i.ytimg.com/vi/cKbgHaQG6BI/default.jpg)
![Install Software Using Group Policy In Server 2019](https://i.ytimg.com/vi/n9CSw0tWYno/default.jpg)
![Deploying Adobe Reader with Group Policy](https://i.ytimg.com/vi/muzuupZQpt0/default.jpg)
![How to Install Google Chrome Using Group Policy in Windows Server 2019 Active Directory](https://i.ytimg.com/vi/R53yqx3HCfs/default.jpg)
![MCITP 70-640: Group Policy Optimization](https://i.ytimg.com/vi/chQfgYyxqmc/default.jpg)