4TH GEN TOYOTA 4RUNNER COLLAPSABLE LEAVE IN BED PLATFORM
This is a bed platform and drawer system for a 4th generation Toyota 4Runner 2003-2009. The skull thing is a bottle opener.
I used hanger bolts like these:
https://www.homedepot.com/p/1-4-in-20-tpi-x-2-in-Coarse-Standard-Steel-Plain-Hanger-Bolts-4-Pack-809321/204273740
Just drill a pilot hole in the leg, then on the hanger bolt you tighten two nuts together, then you can drive the stud or hanger bolt into the leg. Just Google jam nut and you can figure it out. Pretty simple.
To attach the leg assembly to the plywood I used these tee nuts:
https://www.homedepot.com/p/Everbilt-1-4-in-20-Zinc-Plated-Tee-Nut-4-Pack-802301/204274194?MERCH=REC-homepagehorizontal1_rrNA-204274194--N
Simply drill a hole where you want the leg and tap in one of those nuts. Hope this helps!
This is the matress we use:
https://www.amazon.com/dp/B01INZBCJG?ref=ppx_pop_mob_ap_share
Видео 4TH GEN TOYOTA 4RUNNER COLLAPSABLE LEAVE IN BED PLATFORM канала Kevin Wallin
I used hanger bolts like these:
https://www.homedepot.com/p/1-4-in-20-tpi-x-2-in-Coarse-Standard-Steel-Plain-Hanger-Bolts-4-Pack-809321/204273740
Just drill a pilot hole in the leg, then on the hanger bolt you tighten two nuts together, then you can drive the stud or hanger bolt into the leg. Just Google jam nut and you can figure it out. Pretty simple.
To attach the leg assembly to the plywood I used these tee nuts:
https://www.homedepot.com/p/Everbilt-1-4-in-20-Zinc-Plated-Tee-Nut-4-Pack-802301/204274194?MERCH=REC-homepagehorizontal1_rrNA-204274194--N
Simply drill a hole where you want the leg and tap in one of those nuts. Hope this helps!
This is the matress we use:
https://www.amazon.com/dp/B01INZBCJG?ref=ppx_pop_mob_ap_share
Видео 4TH GEN TOYOTA 4RUNNER COLLAPSABLE LEAVE IN BED PLATFORM канала Kevin Wallin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Best SUV sleeping platform yet! Build solo in one day.5th Gen 4Runner 'Low-Profile' drawer system overviewADGU SS1How to Build the Ultimate Overland Truck Bed Kitchen Drawers for Camping!Danny's 4th Gen 4Runner Walk Around - 2008 Toyota Overland - Offroad 4x4 BuildAir Down Gear Up GX460 Drawer and Sleeper System: SS1 Premier Package OverviewHow I turned my 2007 Toyota 4runner into a camper for under $50Micro Camper Build in a 96' 4 Runner Part IIBuilding a Sleeping Platform For The GX470Living in my SUV for two years // Tiny home camper tour // Toyota Sequoia 4x4 OverlandDual Sliding Rear Cargo Drawer Storage / Sleeper Platform - For 4Runner or SUVDIY Drawer less Drawer System for SUV from single sheet of Ply Wood for overlanding and campingConverted 4Runner Tour | Living in 4Runner Full Time | Full time MilitaryInstall/Setup/Disassemble GX470 Sleeping Platform3rd Gen Toyota 4Runner Bed & Drawer System4Runner Specific Air Mattress - Luno Life3RD GEN 4RUNNER BED PLATFORM & STORAGE BUILD | simple, low-cost, functionalI Turned My SUV Into A CAMPER | Easy DIY Platform Build'99 4Runner Camping Table Build OutSleeping In Your 4runner Without A Platform?