Anycubic Mega Zero on BTT_SKR_E3_DIP + TMC2208_UART+ HEATED_BED
Upgrade example from BarbaGiannis3D for Anycubic Mega Zero users.
Silent steppers and heated bed integration.
All stock mechanics.
Custom firmware and configuration below.
Hardware parts needed:
1) BIGTREETECH SKR mini E3 V1.2 32 + TMC2209 drivers UART for Ender 3
https://a.aliexpress.com/_eLIzvP
2) Two Trees heated bed 235*235*3 мм, 24 В 220 Вт, with cable
https://a.aliexpress.com/_eLg1jb
3) optionally - bed insulation
To supply the motherboard with power just cut the jack from the OEM cable and put the two wires accordingly.
Two of the four OEM motherboard holding screws fit enough. Not exactly, but enough.
The sd card port hole in the plastic case needs some cutting.
Changing bed in my case needed some new holes to be drilled on the bed base for the screws. It was easy.
Some photos of the process
https://yadi.sk/d/PeWzrJA3TOMUOg
That's all you need to touch.
The rest is your firmware.
Here is the link to the custom one:
https://yadi.sk/d/lFPHu2KfLkkZdw
Just put it in the core folder of sd card and restart the printer.
Configuration files, if needed:
https://yadi.sk/d/I2_TzwiRAaIAaA
Do not forget to
1) change the E0 driver steps per mm to 3440 after installing the new firmware in the printer settings.
2) deactivate any linear advance settings from internal (put 0 coefficient) settings and any slicer options.
3) to level the bed in the settings.
As reference, you can also use the related videos like
https://youtu.be/txHTPwnvPbs
https://youtu.be/HirIZk0rWOQ
https://youtu.be/3hS-3AWyyn4
If the information was useful for you, please do not hesitate to thumb it up:)
Видео Anycubic Mega Zero on BTT_SKR_E3_DIP + TMC2208_UART+ HEATED_BED канала The Volving Zeus
Silent steppers and heated bed integration.
All stock mechanics.
Custom firmware and configuration below.
Hardware parts needed:
1) BIGTREETECH SKR mini E3 V1.2 32 + TMC2209 drivers UART for Ender 3
https://a.aliexpress.com/_eLIzvP
2) Two Trees heated bed 235*235*3 мм, 24 В 220 Вт, with cable
https://a.aliexpress.com/_eLg1jb
3) optionally - bed insulation
To supply the motherboard with power just cut the jack from the OEM cable and put the two wires accordingly.
Two of the four OEM motherboard holding screws fit enough. Not exactly, but enough.
The sd card port hole in the plastic case needs some cutting.
Changing bed in my case needed some new holes to be drilled on the bed base for the screws. It was easy.
Some photos of the process
https://yadi.sk/d/PeWzrJA3TOMUOg
That's all you need to touch.
The rest is your firmware.
Here is the link to the custom one:
https://yadi.sk/d/lFPHu2KfLkkZdw
Just put it in the core folder of sd card and restart the printer.
Configuration files, if needed:
https://yadi.sk/d/I2_TzwiRAaIAaA
Do not forget to
1) change the E0 driver steps per mm to 3440 after installing the new firmware in the printer settings.
2) deactivate any linear advance settings from internal (put 0 coefficient) settings and any slicer options.
3) to level the bed in the settings.
As reference, you can also use the related videos like
https://youtu.be/txHTPwnvPbs
https://youtu.be/HirIZk0rWOQ
https://youtu.be/3hS-3AWyyn4
If the information was useful for you, please do not hesitate to thumb it up:)
Видео Anycubic Mega Zero on BTT_SKR_E3_DIP + TMC2208_UART+ HEATED_BED канала The Volving Zeus
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Anycubic Mega Zero 3 months of use review and adviceWintergatan - Marble Machine (music instrument using 2000 marbles)How to install heated bed to your Anycubic Mega Zero ?Under 15$ cheap and easy with prepare firmwareMEGA X & Zero 2020 - Was taugen die neuen Anycubic 3D Drucker?Micro Swiss Dual Gear Direct Drive Upgrade For Ender 3 and CR-10 3D PrintersHOW TO Level your 3D Printer´s BED Like a PRO / Mesh Bed LevelingMesh Bed Level on Creality Ender 3 with SKR Mini E3One Week One 3D Print { EP 48 } The Anycubic Mega Zero 3D Printer dreams about Dragons and Fantasy !Primitive Technology: Cord drill and Pump drillFolger Tech FT-5 Large Scale 3D Printer Kit OverviewЗамена драйверов A4988 на TMC2208, термоизоляция столика на 3D принтере AnycubicCreality Ender 3 V2 - Fixing the Hidden Problem that Can Cause Stringing and UnresponsivenessPrimitive Technology: Tiled Roof HutCreality Ender 3 - V1 Versus V2 - Chris's BasementBig Tree Tech SKR Mini E3 V2.0 - Silent Main Board - Install - Chris's BasementAnycubic Mega Zero Lüfter tauschen Teil 1ANYCUBIC I3 Mega LEISER - TMC2208 Einbau + Einstellen [TUTORIAL]Why you should get the Ender-3 v2 instead of the CR-6 SE!New Free Energy Generator Coil 100% Real New Technology Idea Project 2019Обзор 3D принтера Anycubic Mega Zero