VW T4 timing belt service

Here is my attempt at at cambelt replacement on a VW T4 Transporter van, It is a 4 cylinder, 1.9TD ABL engine on a SWB van.
I used a CONTINENTAL CONTITECH CT 867 K2 belt kit with a tensioner pulley. The kit cost £23 delivered. I did not replace the water pump. The torque setting on the camshaft pulley bolt is 45nm. I did not replace the stretch bolt on the crankshaft pulley, but if you loosen it you have to replace it. It is stretched by torquing it and then turning it through a certain angle to stretch it. When I did this job last time there was no Haynes manual available, but there is now and it has the torque settings. I think you can get by without it though.

If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: https://www.patreon.com/bootsowen

https://www.amazon.co.uk/shop/bootsowen

You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
timing belt locking tool kit program: https://amzn.to/3brAtKw
or a multimeter : https://amzn.to/357iwj7
Or the timing belt: make sure you buy the correct one for your engine! : https://amzn.to/2DC5oHC
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Видео VW T4 timing belt service канала bootsowen