Casting 3 layer Fidget Spinner from Soda Cans and Bullet Shells | Brass & Aluminium | PressTube

Making Triple Layer Fidget Spinner from empty Soda Cans and Empty Bullet Shells.

Basically an advanced way of recycling sode cans and bullet shells :)

The outer layers of the Fidget Spinner are Brass (bullet shells) and the inner layer is Aluminium (Soda Cans)

The Spinner is bigger then a normal spinner, but it's not meant to be spinned in one hand, or doing tricks with it.

It's more meant as a collectors item.

This is just a demonstration on how to make a fidget spinner with molten brass.

This is not meant as a DIY fidget spinner video because i assume that not everyone has a melting furnace at home to melt brass or aluminium :)

I spend 4 entire days to complete this project.

Be sure to check out the website from Ispin ! They have some very nice spinners with an awesome quality!

I-Spin website : http://bit.ly/I-Spin

LePicBois Channel : http://bit.ly/LePicBoisChannel

Support our creativity on Patreon here : http://bit.ly/SupportPressTube

================
Giveaway Link Triple Layer Spinner + I-Spin Spinner : http://bit.ly/TripleLayerGiveAway

You can still participate for our Android spinner from our previous video.

Android Spinner : http://bit.ly/AndroidGiveAway
================

SocialBlade PressTube Stats : http://bit.ly/PressTubeStats

If you liked this video, please consider to give it a thumbs-up so I know you liked the video.

Thanks !

Description :

In this video I'm casting a Triple Layer Fidget Spinner from empty bullet shells ( brass ) and Empty Soda Cans ( aluminium ).

The color of the brass has almost the same color as the expensive metal gold. So it kind of looks like a golden fidget spinner, but a fake one then :)

Gold costs about 37.000$ for 1kg so it's impossible to cast this in gold :-)

The bullet shells were bought at a local shooting range here in Belgium/Antwerp.

The hole for the bearing was drilled a tiny bit smaller then the bearing itself, so in order to make it fit i had to put it in liquid nitrogen to shrink it. Once it warmed up again it locked itself in to place.

For this spinner I used a better bearing to make sure the spinner will spin a lot longer then our previous Fidget Spinners.

The Spinner is also bigger then a normal spinner, but it's not meant to be spinned in 1 hand. It's more meant as a collectors item.

You can see the spinner spinning at the end of the video together with the other smaller fidget spinners.

I spend 4 entire days to complete this project.

The slowmotion footage was made by our IDT slowmotion camera which we bought in June 2016 from the guys at IDT Europe : http://bit.ly/IDT-SlowMoCams

Our Casting Videos :

YouTube PlayButton : http://bit.ly/PlayButtons

Superman Logo : http://bit.ly/SuperManLogo

Batarangs : http://bit.ly/Batarangs

Bugatti Logo : http://bit.ly/BugattiLogo

Flash Logo : http://bit.ly/TheFlashLogo

PlayBoy Bunny : http://bit.ly/PlayBoyLogo

Green Lantern Logo : http://bit.ly/GreenLanternLogo

OverWatch Logo : http://bit.ly/LogoOverWatch

FaZe-Clan Logo : http://bit.ly/CastingFaZe

Brofist PewDiePie : http://bit.ly/CastingBrofist

Future Casting Videos :

Chevrolet
Avengers
Batman
Razer
galactic empire logo
Rebel Alliance Insignias
Spiderman
Nissan GTR
Assasins Creed
USB logo
Euro Logo
Skype Logo
Apple Logo
Hunger Games
KTM motocross
Dota2
Rainbow Six
Skyrim
Rolex
Fidget Spinner (that doens't spin but looks great)
Skyrim
Team Fortress 2
Tesla
Iron Man
League Of Legends
Guardians Of The Galaxy

Let us know if you have other good ideas !

This video is for entertainment purpose only. If you try to do this yourself at home, please be aware that you use personal protection gear. If you are not experienced with melting metals please do not attempt this on your own.

You can contact us at :

presstube@telenet.be

Видео Casting 3 layer Fidget Spinner from Soda Cans and Bullet Shells | Brass & Aluminium | PressTube канала PressTube