Covering your Balsa model with different color tissue

Covering your model with different color tissue
By James Packwood
www.myrccenter.com
www.my-rc-zone.com

Rubber motor models come with a generous sheet of tissue to cover your model with. If you building a static model for display this is ok since you’re probably going to paint it so weight will not be a problem. But if you going to build a flying model, either indoor or outdoor then you going to want to reduce as much weight as possible. Using different color sheets of tissue will allow you to have a multi-color scheme on your model. I found it difficult searching for sources on the internet and most hobby stores usually carry just the Guillow’s white tissue. Below I have listed the sources that I could find. You could also ask your local hobby shop if they can order it for you.
Happy Building
Easy Built Hobbies ( recommended )
http://www.easybuiltmodels.com/b02.htm

Tower Hobbies
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=covering+materials+%3Cb%3Etissue%3C%2Fb%3Es

Fly 2 Build
http://fly2build.com/coveringmaterials&supplies.html

Micron Radio Control
http://www.micronradiocontrol.co.uk/covering_tissue.html

Free Flight Models
http://www.freeflightmodels.com/pages/aerodyneproducts/covering_materials.htm

Sam’s Models
http://www.samsmodels.com/acatalog/Section_B._Covering_materials.html

Видео Covering your Balsa model with different color tissue канала MyRCCenter