How to Stone Grind Skis by Peterson's Ski and Cycle

In this video we will explain the stone grind process for ski tuning. We tried to keep the video quick and informative but the tuning process is anything but quick. The initial pre-grind phase takes multiple passes for optimum results. Sharpening the edges is also a skill considering the degrees range from 1° to 4°. The bases have the same consideration from .5° to most commonly 1°. P-Tex is also a consideration when there are chunks of base material missing from the base creating divots or gouges. Polishing the edges is fairly straight forward to remove any burrs from the sharpening phase. Waxing can be done in multiple steps depending on the snow conditions and type of was desired. Again we wanted to keep it quick and engaging rather than long and winded. Any questions please visit our website at www.petersonsskiandcycle.com for contact information and hours.

Видео How to Stone Grind Skis by Peterson's Ski and Cycle канала Peterson's Ski & Cycle