Eluktronics MECH G3 2070 Super vs 2080 Super MaxQ

The MECH-15 G3 houses the new Super GPUs from Nvidia! I have both and only ONE comes out on top!

Here's Amazon Stock that has Liquid Metal on the CPU!
2070 Super 512gb NVMe 16gb memory $2099 https://amzn.to/3jfnLkK
2070 Super 1tb NVMe 32gb memory $2299 https://amzn.to/3jsYGD7
2070 Super 2tb NVMe 32gb memory $2399 https://amzn.to/31Bq8sf
2080 Super MQ 512gb NVMe 16gb memory $2499 https://amzn.to/3b6iCZp
2080 Super MQ 1tb 32gb memory $2699 https://amzn.to/3bchROA
2080 Super MQ 2tb 32gb memory $2799 https://amzn.to/2QxX6TP
Amazon links help the channel! These specific links to the G3 offer Liquid Metal on the CPU for better sustained CPU clocks and lower temps in games.
https://www.eluktronics.com/MECH-15-G3

Temp Talk!
The GPU on both would hit the high 70c range but you can configure the system for lower temps!

The CPU on the 2070 Super MaxP would hit 90c during Beast Mode and maybe 5c cooler on the CPU on the 2080 Super MaxQ model. While we have Liquid Metal on that laptop, we also have less wattage on the GPU to transfer heat as well. This made it hard to address LM thermal performance in general.

MUST WATCH!
Secret EluktroBoost video https://www.youtube.com/watch?v=wXrPUgWlVoA
This explains what's going on with the 2070 Super Eluktroboost wattage...

MUX Switch Video! https://www.youtube.com/watch?v=Msh5tXdsFhY

Own Or Disown MECH G3 review https://www.youtube.com/watch?v=nDYx3phPsNY

Memory Tweaking talk! Should you cause a boot issue, just unplug the cmos battery to reset the system....I might have done this a few times ;)

Trackpad Talk! Several months back I sent over a solution to fix trackpad rattle to Eluktronics to forward to their chassis maker. They applied a very good solution per my request so hopefully this solves that little nuisance.

Power Limits on the 10875H. This was per my strong recommendation. I had this dialed in within the first 48 hours of delivery and sent in for approval. My request was approved and this is the outcome. A very strong performing laptop with several options, none of which involve 3rd party software.

Undervolting. Factory UV was originally at a -.050 maximum. These 10th gen chips seem pretty tight on voltage so pushing beyond this was a hard sell for the BIOS maker. But we got it to -.080 and that might not be safe for everyone.

DPC Latency for Real-Time Audio. This could use some work and when attempting to address the problem I was unable to solve it at the time of use. This is typically an interference with a driver and should be fixable. Time will tell.

Improvements made for this chassis compared to the previous model.
-Slightly larger fans
-Tighter trackpad
-8 cores vs 6
-Memory tuning
-Q-Key Functionality
-FN key functions
-240hz
-MUX switch! Very big deal!
-4w speakers vs 2w

Unknowns: Does the new MAX/Mech feature ELuktroBoost with their 2070 MaxP? The previous MAX-15/17 equipped with the 2070 MaxP did NOT feature EluktroBoost because it was too HOT. This might be the case still and Eluktronics themselves doesn't know yet.
https://www.patreon.com/user?u=15256471

0:00 Intro
1:07 Specs
1:47 Battery Life and MUX
2:55 Display and Webcam
3:43 Port Selection
4:07 Size
4:36 Trackpad and Keyboard
5:18 Unique BIOS Features
6:08 Performance Benchmarks and Gaming
9:59 Speaker Audio
10:33 Conclusion

#Laptop_Life
#BobOfAllTrades

Видео Eluktronics MECH G3 2070 Super vs 2080 Super MaxQ канала Bob Of All Trades