Pressure Pot vs Vacuum Chamber | Resin Dice Casting
In this video, I go over the differences in Pressure Curing Resin for Dice Making, vs using a Vacuum chamber to remove the bubbles in your resin.
In essence, you can do EITHER, but the pressure pot works BETTER at getting you a consistent results with your dice making, with a lot less work on your end. Just put it in and forget it.
When curing with a pressure pot, the bubbles in your resin/silicone casting become so small, that they can't be seen by the human eye. When using a vacuum to remove the bubbles from the mold in your casting, you pull the bubbles WAY too far out of the mold, leaving you with not enough resin to finish your casting.
Now you CAN vacuum out the bubbles, and then pour it, but you run the risk of just adding bubbles at that stage anyway.
So really, my money is on getting a pressure pot over a vacuum chamber. It does two jobs, and I'm told that it can cure your silicone for your molds in the same way, but I have yet to try that myself. So take THAT part with a grain of salt.
Amazon Affiliate Link to the resin material that I used. Available in smaller batch sizes as needed: https://amzn.to/2KXlUkY
Amazon Affiliate Link to the mold material I used: https://amzn.to/2zccY5P
Amazon Affiliate Link to the Vacuum Chamber Kit: https://amzn.to/2PGwPU6
Harbor Freight Pressure Pot that I use/adapted for Resin Casting: https://www.harborfreight.com/2-1-2-half-gallon-pressure-paint-tank-66839.html
If you like twitter, I got one! https://twitter.com/Rybonator1
I also have an Instagram! https://www.instagram.com/dm_rybonator/
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
https://youtu.be/HxKqYAxeBO8
"Renaissance Period" "Music For Youtube Videos" "Royalty Free Music"
LAKEY INSPIRED - Better Days
https://www.youtube.com/watch?v=RXLzvo6kvVQ
Resin Safety Data Sheet: https://cdn.shopify.com/s/files/1/1211/0334/files/Art_N_Glow_Clear_Casting_And_Coating_Epoxy_Resin_SDS_Complete.pdf
Видео Pressure Pot vs Vacuum Chamber | Resin Dice Casting канала Rybonator
In essence, you can do EITHER, but the pressure pot works BETTER at getting you a consistent results with your dice making, with a lot less work on your end. Just put it in and forget it.
When curing with a pressure pot, the bubbles in your resin/silicone casting become so small, that they can't be seen by the human eye. When using a vacuum to remove the bubbles from the mold in your casting, you pull the bubbles WAY too far out of the mold, leaving you with not enough resin to finish your casting.
Now you CAN vacuum out the bubbles, and then pour it, but you run the risk of just adding bubbles at that stage anyway.
So really, my money is on getting a pressure pot over a vacuum chamber. It does two jobs, and I'm told that it can cure your silicone for your molds in the same way, but I have yet to try that myself. So take THAT part with a grain of salt.
Amazon Affiliate Link to the resin material that I used. Available in smaller batch sizes as needed: https://amzn.to/2KXlUkY
Amazon Affiliate Link to the mold material I used: https://amzn.to/2zccY5P
Amazon Affiliate Link to the Vacuum Chamber Kit: https://amzn.to/2PGwPU6
Harbor Freight Pressure Pot that I use/adapted for Resin Casting: https://www.harborfreight.com/2-1-2-half-gallon-pressure-paint-tank-66839.html
If you like twitter, I got one! https://twitter.com/Rybonator1
I also have an Instagram! https://www.instagram.com/dm_rybonator/
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.
MUSIC:
https://youtu.be/HxKqYAxeBO8
"Renaissance Period" "Music For Youtube Videos" "Royalty Free Music"
LAKEY INSPIRED - Better Days
https://www.youtube.com/watch?v=RXLzvo6kvVQ
Resin Safety Data Sheet: https://cdn.shopify.com/s/files/1/1211/0334/files/Art_N_Glow_Clear_Casting_And_Coating_Epoxy_Resin_SDS_Complete.pdf
Видео Pressure Pot vs Vacuum Chamber | Resin Dice Casting канала Rybonator
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The Complete Guide to Dice Making | Sprue MoldsWhen to Use a Pressure Pot or a Vacuum Chamber | Alumilite5 Ways to Get Bubbles Out of Resin | Resin ARTALMOST FAIL first casting with new pressure potDIY Vacuum Pump And ChamberResin Dyeing Experiments - Testing 30 IngredientsDice Making Basics: SuppliesCasting Clear Dice Pt. 2 | Vacuum ChamberRollin' With Rybonator: Candy Dice from Critical RoleEpoxy resin - casting technique to get rid of air bubbles - no pressure pot neededHow to Polish, Clean & Ink Custom DiceResin Casting: Pressure vs VacuumHow to Stabilize Wood and Why Should You do it?Making Spooky Spider & Glow in the Dark DicePremade Molds | Sophie & Toffee Dice Vault / Box MoldsHow to Make Your Own Dice | Spooky Halloween Editionhome made SIMPLE BUILD vacuum chamber - by VOG (VegOilGuy)VACUUM vs PRESSURE CASTING | Bubble-Free Resin Casting, Epoxy Casting Without BubblesHow to Make Silicone Dice Molds | Sprue Method