DIY FLOPPY DRIVE CNC: Part 1 - Hack a Floppy Drive
To make a CNC machine, you need to use stepper motors. Floppy drives have them, we can use them :D This is an easy way for you to get a basic understanding of how stepper motors work. In this video we prepare a floppy drive for use in our MINI CNC machine, and explain how the pins are interfaced to make the stepper motor move. In the next video we make a printer port interface that we can then use to trigger the floppy drive pins.
Notes: Not all Floppies CD-Roms are created equally, for this project we are going to interface with bi-polar stepper motors found commonly inside of CD-Roms and floppy drives but some CD-Roms have rotary encoders and plain dc motors (they have 1 red and one black wire) we are looking for CD-Roms with stepper motors. Also optimally we would use the same floppy drive make and brand so the controller assembly would look cooler (optional).
Видео DIY FLOPPY DRIVE CNC: Part 1 - Hack a Floppy Drive канала Richard Harris
Notes: Not all Floppies CD-Roms are created equally, for this project we are going to interface with bi-polar stepper motors found commonly inside of CD-Roms and floppy drives but some CD-Roms have rotary encoders and plain dc motors (they have 1 red and one black wire) we are looking for CD-Roms with stepper motors. Also optimally we would use the same floppy drive make and brand so the controller assembly would look cooler (optional).
Видео DIY FLOPPY DRIVE CNC: Part 1 - Hack a Floppy Drive канала Richard Harris
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![DIY FLOPPY DRIVE CNC: Part 2 - The Printer Port Interface](https://i.ytimg.com/vi/SH68DZq8pQk/default.jpg)
![DIY FLOPPY DRIVE CNC: Part 3 - Parallel Port Monitor (Parmon)](https://i.ytimg.com/vi/JbPRH9HkrIQ/default.jpg)
![DIY FLOPPY DRIVE CNC: Part 4 - Connect/Test the Interface](https://i.ytimg.com/vi/_oTTIVwvLGs/default.jpg)
![3 ideas - what can be made from an old HDD](https://i.ytimg.com/vi/n7CA2orjnXY/default.jpg)
![4 INCREDIBLE project with old CD/DVDrom](https://i.ytimg.com/vi/cO7-pSsbCP0/default.jpg)
![Micro Mini CNC Plotter - Part 2 - Testing Hardware and Software](https://i.ytimg.com/vi/WCcC8wMECvQ/default.jpg)
![Floppy Disk Drive Disassembly](https://i.ytimg.com/vi/CB4nHFJg8O4/default.jpg)
![How to Make a CNC machine at home](https://i.ytimg.com/vi/2VFOU-WUQIY/default.jpg)
![Converting Computer ATX Power Supply to Lab Bench Power Supply](https://i.ytimg.com/vi/z2oSFpKh_Uw/default.jpg)
![Double Sided PCB CNC Milling](https://i.ytimg.com/vi/xz4LCIJyd2A/default.jpg)
![TOP 10 CD/DVD/Floppy Drives based Projects](https://i.ytimg.com/vi/PD-tPfSrG2g/default.jpg)
![Floppy Drive to USB storage p2](https://i.ytimg.com/vi/Muv25T_nRs4/default.jpg)
![Salvage Stepper Motors and Controllers From Electronics](https://i.ytimg.com/vi/-Gw4PdlVOvE/default.jpg)
![Floppy Disk Drive Teardown - Scrapping 101](https://i.ytimg.com/vi/F56pCTLy8DQ/default.jpg)
![HACKED!: Laser Diode from DVD Burner || Constant Current Source](https://i.ytimg.com/vi/AwcQsbgy7AY/default.jpg)
![Cnc parts from old flatbed scanners part2](https://i.ytimg.com/vi/E02pAsnNmzE/default.jpg)
![Plotter made of two old CD drives, a servo and a Raspberry Pi](https://i.ytimg.com/vi/-XhMT4wXSG4/default.jpg)
![Upgrading to a Solid State Floppy Drive Emulator](https://i.ytimg.com/vi/JWUgV09H5C0/default.jpg)
![Hard Drive Stepper Motor as Rotary Encoder](https://i.ytimg.com/vi/bHgAbA7qq0w/default.jpg)
![DIY FLOPPY DRIVE CNC: Part 10 - Final Setup + EMC2 Control](https://i.ytimg.com/vi/5okhhgtIUPo/default.jpg)