ASUS WIFI Router Setup Configer First time How To In detail

To Login Asus TM_AC1900 wifi router default login
User Name :- admin
Password:- password
Change network name (SSID) or password1.Make sure your computer or phone is connected to the router.
2.Enter either URL in the web browser:◦http://cellspot.router (phones use this link)
◦http://192.168.29.1

3.Log in to the configuration page using your login name and password.◦The default router login is name (admin) and password (password).
◦If you set up your own password and have forgotten it, reset the router.

4.See the SSID and password steps below to update.



Network name (SSID)
1.From the General tab, select the CellSpot_5GHz_[4-digit ID] and change its name.
2.Update the WPA Pre-Shared Key to your previous network password.
3.Click Apply.
4.Reconnect your devices to the Wi-Fi network.
5.Use the 2.4GHz band if connecting existing devices (printers, cameras, etc.).



Password
1.On the Network Admin page, go to the System Status section of the Network Map.
2.Click the 2.4GHz tab.◦In the Authentication Method drop-down, click WPA2-Personal.
◦In the WPA-PSK key field, enter a password that is at least eight characters.

3.Click the 5GHz tab.◦In the Authentication Method drop-down, clickWPA2-Personal.
◦In the WPA-PSK key field, enter a password that is at least eight characters. You can use the same password you entered in step 4.

4.Click Apply, and the router restarts.
5.Once restarted, reconnect using your new password. If you lose this password, the router must be reset to its default settings




Reset router
Restart router & modem

Restart the modem and router before performing a full reset. This can fix minor problems, and also check for and install firmware updates.


1.Unplug your modem.
2.Unplug your router.
3.Turn off your computers.
4.Plug in the modem, and wait for two minutes.
5.Plug in the router, and wait for two minutes.
6.Turn the computers on.



Reset the router
1.Press and hold the Reset button on the back of the router for eight seconds.
CellSpot RouterReset Button_350.png
2.Release the Reset button.
3.The router is now reset to the factory default settings.



Default router settings

Resetting the router restores it to its default settings, which are listed below.


•User Name: admin
•Password: password
•Enable DHCP: Yes (if WAN cable is plugged in)
•IP address: 192.168.29.1
•Domain Name: (Blank)
•Subnet Mask: 255.255.255.0
•DNS Server 1: 192.168.29.1
•DNS Server 2: (Blank)
•SSID (2.4GHz): CellSpot_2.4GHz_(four digit MAC ID)
•SSID (5GHz): CellSpot_5GHz_(four digit MAC ID)

Видео ASUS WIFI Router Setup Configer First time How To In detail канала Jay Kay