How to clean your Dyson Airwrap™ styler's filter

If your Dyson Airwrap™ styler cuts out during use a light starts flashing, won't turn on
or becomes overheated, these could be signs that your filter needs cleaning.

To maintain optimum performance, we recommend cleaning your
Dyson Airwrap™ styler's filter regularly, as shown in our video guide. Always switch off and unplug your appliance before carrying out any maintenance.

If it's been in use, allow it to cool down completely. First, use the filter cleaning brush to remove any debris from the outer filter cage. Next, remove the outer filter cage from the appliance and rinse under warm running water. Tap to remove excess water - do not replace the filter cage on the appliance until it is fully dry. The inner filter mesh should then be brushed clean with the filter cleaning brush using a rotating action. Our experts are on hand to help, so leave us a comment if you'd like some further advice.

To maintain optimum performance your Dyson Airwrap™ styler requires regular care and maintenance.

IMPORTANT: always switch 'OFF', unplug and allow the machine and attachments to cool down before carrying out any maintenance.
Step 1. Slide the filter cleaning brush over the cable and onto the filter cage.
Step 2. Using a rotating action, clean the filter cage thoroughly.
Step 3. Pull the filter cage downwards, onto the cable.
Step 4. Gently pull open the filter cage and slide it off the cable.
Step 5. Wash the filter cage under a warm, running tap.
Step 6. Tap to remove excess water and leave to dry naturally.
Step 7. Using a rotating up and down action, clean the filter mesh until all the debris has been removed.
Step 8. Gently pull the filter cage open and slide it onto the cable.
Step 9. Slide the filter cage towards the handle until it snaps into place.

Did this video solve your issue? Like if it did, or leave a comment. 👍

Видео How to clean your Dyson Airwrap™ styler's filter канала Dyson