DIY Oxalic Acid vaporizer - Made using a band heater

You will need access to a lathe and welding torch to make this project. You will turn the main heater block and teflon caps on the lathe. You will weld the copper pipes using a welding torch. Silver soldering the pipes will NOT work. Keep the outlet pipe as short as possible and clean it will water vapors after every use otherwise the oxalic acid will clog up the 1/4" pipe.

Here are the product links from Amazon:
Inkbird °F and °C Display PID Stable Temperature Controller ITC-106VH:
https://amzn.to/2yRCFZs

110V 380W Injected Mould Heating Element Band Heater 35x35mm:
https://amzn.to/2qspf1D

Ptfe Virgin White Rod Bar 2" diameter x 12" Length: https://amzn.to/2RDbOHO

Видео DIY Oxalic Acid vaporizer - Made using a band heater канала Princeton Projects