Pelagic Autopilot Installation and Test
We install and test the Pelagic autopilot on the Pearson Triton sailboat, Atom. Tested it first on the rivers in Georgia and then on a round-trip offshore passage of 160 miles to St. Augustine in winds from calm to 20 knots on all points of sail including wind against tide. It is slightly noisy compared to a windvane. It used about 1 amp in near calm and 2 amps average in 15 knots of wind, boat speed 5 knots and moderate seas. It's great for coastal navigating or in light winds or motoring when the windvane won't hold a course or as a backup if the windvane failed offshore but it seems robust enough to handle even a long offshore passage. Cost in 2019 is $875 which makes it significantly less expensive than the EVO-100 and probably better performance. For more info see:
https://www.scanmarinternational.com/pelagic-autopilot
Видео Pelagic Autopilot Installation and Test канала atomvoyager
https://www.scanmarinternational.com/pelagic-autopilot
Видео Pelagic Autopilot Installation and Test канала atomvoyager
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Pelagic autopilot reviewDodger and Bimini Design and Construction Triton Osprey Refit Part 13Test AutopilotRaymarine ST1000 and GPSmapPelagic autopilot in choppy waterWALK THROUGH OF OUR NEW 795XST FROM EXTREME BOATSForward Scan SonarStarter sailboat for sale for $6500!! - the ultimate & popular coastal cruiser sailboat! - Ep 10Isotherm Fridge - Step by Step Installation | ⛵ Sailing Britaly ⛵ [Boat Work]How to install a rudder angle sensor on a sterndrive boatRaymarine Autopilot Install – part 1Marine autopilot installation - Raymarine EV-100 autohelm - Ep. 134Raymarine Live: Autopilot Basics for Every BoatAtom's Shakedown 2016Rewiring Sailboat 12 Volt Electrical Triton Osprey Refit Part 8SF to LA Delivery demonstration of Pelagic Autopilot in NW PacficInstalling Portlights, Hatch, Chain Plates, Triton Refit Part 12Electric Propulsion Columbia 29 TranquilityAlberg 30 Lora Begins a CircumnavigationBuilding your own Chartplotter with a Raspberry Pi and OpenCPN