B20 vtec dowel pin scenario breakdown DIY how to felpro gasket

This is three scenario on how to put a dowel pin on a b20 block. Dowel pin from the intake side ( drill the head and make wider), dowel pin from the exhaust side (Ls vtec step down dowel pin, golden eagle gasket or make a bigger hole in the stock gasket), no dowel pin (have performance head stud and torque down at 80lb). On video, "I HAD PUT GASKET WRONG WAY" (using as example). For b20 vtec oil you can use sandwich plate on oil filter, or buy a t fitting and tapped the oils pressure sensor. Block oil return hole on head by treading and adding a small plug. The oil line has to be tapped from the intake side for oil to feed into sandwich or t fitting. If using Stock b20 timing belt leave stock Ls or b20 water pump. If using gsr timing belt used 22 teeth gsr water pump. You can use b20 distributer if you chop off one leg that is into the way of vtec solenoid (one bolt on top and the other bolt

HellaStance Instagram - @HellaStance
https://www.instagram.com/hellastance/

Official HellaStance Instagram - @officialhellastance
https://www.instagram.com/officialhellastance/

Our Instagrams
Scotts Instagram - @scott_503
Guillermo's Instagram - @elwolfefa5
Taylor's Instagram - @pdx_golddigger
Omar's Instagram - @silverfoxpdx

More to come. Free giveaways coming soon.

Want to send us something:
Hellastance
8216 NE Sacramento St
Portland, OR 97220

Видео B20 vtec dowel pin scenario breakdown DIY how to felpro gasket канала HellaStance