Mini cnc machine / How to make G-code file from text and image / part 4

ALL File : http://www.mediafire.com/file/0e7twe4p381x7rq/Mini_CNC.rar/file
You need to decrease the voltage to 4.5 volts for the 2 amps , or use 5 volts 0.700 amps charger.
If it does not work with you, this means that you burned the motors

to upload the Circuit go to part 3

part 1 : https://goo.gl/GHZDtk
part 2 : https://goo.gl/bQWAEu
part 3 : https://www.youtube.com/watch?v=vrl9JGncBaA
i am sorry about the video quality
If you have any question please feel free leave it in the description

FaceBook : https://bit.ly/2WSnrxw
instagram : https://bit.ly/2Q9UIBL

parts :
3 DVD Driver
2 Screw 5 cm length 6 mm diameter
4 Screw 2.5 cm length 6 mm diameter
14 Nut 6 mm diameter
Aluminum Angle 2 cm 12 cm length
pvc pipe 10cm length 50mm diameter
servo sg90
prototype pcb
2 l293d ic
arduino nano
wires jumper
#cnc #cncprinter

Видео Mini cnc machine / How to make G-code file from text and image / part 4 канала Hardware Boy