Motor City Aftermarket - Tube Door Install Guide - 2015-2018 Jeep Renegade

Jeep Renegade Tube Door Install

1.Open the door. Use a screwdriver, allen wrench, or something similar to close the door lock “latch” to fool the door into thinking that it is closed. This will ensure that the interior lights are not on while the tube doors are installed.

2. Disconnect the wiring harness.

3. Remove the torx screw from the swing stop. We recommend leaving the swing stop extended.

4. Remove bolts from the top and bottom hinges. Note: These two bolts will be used to reinstall the tube doors.

5. Carefully remove the doors and place aside.

6. Align the tube door over the hinges and slide into place. Note: The vehicle hinge placement may vary. Tube door hinges might not slight right in. Using the screws you removed from the door, screw the tube door into place.

7. Align the door latch and bolt into place on the latch bracket.

8. Repeat the same process for the other door(s).

IMPORTANT: Review your local laws before venturing out on to any road with your tube doors installed. Use these doors at your own risk.

Видео Motor City Aftermarket - Tube Door Install Guide - 2015-2018 Jeep Renegade канала Motor City Aftermarket