1/144 Revell U-boat VIIC 41 RC Conversion ep.7

The next episode will end with painting, All functions test, and final balance work.

00:05 After the failure of the Diver test, I assembled a Plamodel to refresh myself.
00:11 Small submarines are also affected by air bubbles.
I try to make as many air vents as possible.
00:51 I'm going to make an air vent
01:07 air vent
01:22 The rest of the assembly will be finished after coloring.
01:32 Forced the receiver wires in. It looks like there was a crack then. Maybe.
01:57 I used latex gloves.Would a condom be better?
03:12 Test again~
03:37 Pump is not working
03:51 When open it, the pump work. I'm going crazy
03:57 -Is it due to internal pressure in the waterproof space?
-Is the ballast pack under the battery due to battery pressure?
-Is the pump power insufficient?
04:10 Retest with 18350 batteries
04:19 It's working!!!!!!!!!!!!!!!!!!!
04:26 The weight of the battery is causing the stern to sink
04:31 It doesn't matter if it sinks. I'm happy when the pump is running
04:45 What's wrong!
04:49 unresponsive to the magnetic switch
05:12 Replace with toggle switch
06:42 Test again~
06:57 It's working
07:44 There is a gap
09:11 The gap is irritating
09:20 I'll fill the gap
09:47 For car putty
10:48 I don't think the putty effect is enough

Видео 1/144 Revell U-boat VIIC 41 RC Conversion ep.7 канала tiver21