Flying the MFD 5000/3000 Heavy Lift Drone with a Pixhawk 2.1/Cube and HereLink : Full Tutorial
This is an in-depth detailed video explaining how our MFD 3000 & 5000 aircraft operate with a Pixhawk 2.1/Cube flight controller, in conjunction with the HereLink radio system. These aircraft come from our facility pre-programmed and ready to fly. This video is a step by step tutorial on how to prepare the aircraft for flight, fly the aircraft, and auto-tune the aircraft. In this video I cover everything that a licensed operator needs to know in order to fly our aircraft which is equipped with a Cube flight controller and HereLink.
This video does not cover autonomous missions- that will be covered in a future video.
In general, this video can be applied to virtually any multirotor that utilizes the Cube flight controller and HereLink, assuming it is already set up and ready to fly.
Video Timeline:
00:29 - Intro
01:29 - The Cube Background
03:01 - HereLink Background
04:01 - Using HereLink
14:18 - Calibrating the Compass Using Mission Planner
18:23 - Preparing the Aircraft For Flight
24:41 - Flight
26:15 - Autotuning Procedure (May also be performed in Position Hold / Loiter Mode!)
31:21 - Conclusion
I hope you find this video useful!
You may purchase the Cube and HereLink for your own aircraft here:
Pixhawk 2.1: https://amzn.to/379VkPG
Pixhawk Blue Cube: https://amzn.to/365WlXs
HereLink: https://amzn.to/3761d03
The MFD 3000 / 5000 by Watts Innovations.
Special thanks to:
Chris Baquol
Thomas Stone from IR Lock
Philip Rowse from ProfiCNC
The ArduPilot Developers & Community
Видео Flying the MFD 5000/3000 Heavy Lift Drone with a Pixhawk 2.1/Cube and HereLink : Full Tutorial канала Bobby Watts
This video does not cover autonomous missions- that will be covered in a future video.
In general, this video can be applied to virtually any multirotor that utilizes the Cube flight controller and HereLink, assuming it is already set up and ready to fly.
Video Timeline:
00:29 - Intro
01:29 - The Cube Background
03:01 - HereLink Background
04:01 - Using HereLink
14:18 - Calibrating the Compass Using Mission Planner
18:23 - Preparing the Aircraft For Flight
24:41 - Flight
26:15 - Autotuning Procedure (May also be performed in Position Hold / Loiter Mode!)
31:21 - Conclusion
I hope you find this video useful!
You may purchase the Cube and HereLink for your own aircraft here:
Pixhawk 2.1: https://amzn.to/379VkPG
Pixhawk Blue Cube: https://amzn.to/365WlXs
HereLink: https://amzn.to/3761d03
The MFD 3000 / 5000 by Watts Innovations.
Special thanks to:
Chris Baquol
Thomas Stone from IR Lock
Philip Rowse from ProfiCNC
The ArduPilot Developers & Community
Видео Flying the MFD 5000/3000 Heavy Lift Drone with a Pixhawk 2.1/Cube and HereLink : Full Tutorial канала Bobby Watts
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ALTA X Heavy Lift Drone - Behind the ScenesTop 10 BIGGEST DRONES you can flyHerelink For Pixhawk & The Cube - Initial Setup and Connection OverviewZD850 Maiden Flight, Cube Orange, HerelinkDon't Tighten Another Bolt Without Doing This! Nuts & Bolts: ThreadlockerThe Cube Autopilot & Flight Controller Compared and Overview + Uavionix ADS-B CarrierMy Flight Controller Picks for New Builds (May 2020)The Cube Pixhawk 2 Autopilot and Flight Controller Explained - All Versions Carrier BoardsMFD 5000 Heavy Lift Drone Overview, Assembly, and SetupMeet the dazzling flying machines of the future | Raffaello D'AndreaHerelink Complete Menu & Settings OverviewHerelink Digital FPV System Range Test's - 16km Possible ?The Cube Orange Autopilot/Flight Controller With ADS-B Overview, Setup & ADSB DemoHerelink gimbal setup💰9 Ways to Make MONEY with Your DRONEDrone Flying Tips - 5 Skills Beginner Pilots Should MasterHow to setup a Pixhawk flight controllerETHiX Trick Series : basics with Mr Steele | FPVAURA UAV. Presenting the GAME CHANGER. Heavy lift Drone with 120 KG payload.2021 refresh for Pixhawk build