MIG 130 Welder Modified - Part 1

Installing a separate transformer for the wire-feed motor in my MIG 130 welder.

Ground Clamp:
https://www.harborfreight.com/300-amp-welding-ground-clamp-63784.html?_br_psugg_q=ground+clamp

6 awg Welding Cable:
https://www.wireandsupply.com/category_s/69.htm

24v Transformer:
https://www.mpja.com/24V-2A-Center-Tapped-12-0-12-Transformer/productinfo/27844+TR/

Piggy back spade connectors:
https://www.ebay.com/itm/100-PIGGY-BACK-PIGGYBACK-SPADE-CRIMP-CONNECTOR-TERMINAL-40-RED-50-BLUE-10-Y-U1C8/192934812698?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Dinse Connector:
https://www.ebay.com/itm/Black-DKJ-10-25-Quick-Fitting-Welding-Cable-Connector-Male-Plug-Female-Socket/322645470200?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D20131231084308%26meid%3De80e8734b98145f4be6295b2127756a9%26pid%3D100010%26rk%3D1%26rkt%3D12%26sd%3D222553613693%26itm%3D322645470200%26pmt%3D1%26noa%3D1%26pg%3D2047675&_trksid=p2047675.c100010.m2109

Видео MIG 130 Welder Modified - Part 1 канала cri8tor